® DVD PLAYER DV-980H USER MANUAL READ CAREFULLY BEFORE OPERATION
Table of Contents Important Information ............................................................... 1 Important Safety Instructions .................................................................................... 2 Additional Safety Instructions .................................................................................... 2 Cautions....................................................................................................................... 3 FCC Statement ...........................
Subtitle Selection ..................................................................................................... 28 Angle Selection ......................................................................................................... 28 Zooming the Displayed Frame.................................................................................. 29 ADVANCED OPERATIONS ....................................................... 30 TV System Selection ..................................................
Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
I M P O R T A N T I N F O R M A T I O N Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
I M P O R T A N T I N F O R M A T I O N 13) When smoke, abnormal smell or sound appears from the product, please cut off power immediately and contact your dealer or service center. 14) Never insert any metal object into the cabinet. It may create danger of electric shock. 15) After service and maintenance, please let the service person do safety check to ensure proper operation of the unit. 16) The main plug is used as the device for cutting off power, so make sure the main plug easy to unplug.
I M P O R T A N T I N F O R M A T I O N Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
INSTALLATION Front Panel Controls 1 2 3 4 5 6 7 1. POWER Button 2. Resolution Indicators 3. Disc Tray 4. OPEN/CLOSE Button 5. IR Remote Sensor 6. Display Window 7. Playback Control and Navigation Buttons 8. HDMI Button 9. USB Port 8 Front Panel Display Window 1 7 2 3 4 5 8 9 6 10 1. Disc Type Indication – Indicates the currently playing disc type 2. Title/Group – When illuminated, the displayed time applies to a title or group 3.
I N S T A L L A T I O N Rear Panel Connectors 1 2 3 4 5 6 7 1. HDMI Output 2. Composite Video Output 3. S-Video Output 4. Component Video Output 5. Coaxial Digital Audio Output 6. Optical Digital Audio Output 7. 7.
I N S T A L L A T I O N Remote Control 1 37 2 3 4 36 35 5 34 6 33 7 32 8 31 9 10 11 30 12 29 13 28 14 15 16 27 26 17 18 25 19 20 24 21 22 23 1. POWER Button – Toggle power STANDBY and ON 2. DVD/USB Button – Select DVD or USB device as content source 3. ON Button – Turn power ON 4. OFF Button – Turn power OFF 5. AUDIO ONLY Button – Turn off/on video 6. VOLUME - Decrease volume 7. NUMBER Buttons – Enter numeric values 8. TITLE Button – Show DVD title menu 9.
I N S T A L L A T I O N Battery Installation 1. Remove the battery compartment cover 2.
I N S T A L L A T I O N Making the Video Connection HDMI Connection Rear Panel HDMI Cable Composite Video Cable (Included, Optional) HDMI In S-Video Cable (Optional) Video In S-Video 9
I N S T A L L A T I O N DVI Connection Rear Panel DVI HDMI - DVI Cable Audio Cable DVI Audio Composite Video Cable (Included, Optional) Video In S-Video Cable (Optional) S-Video Method 2 – DVI Connection to TV • If your TV has a DVI input, you can purchase an HDMI-DVI adapter cable to connect the DVD player to the TV. This connection method delivers digital video to the TV without any signal degradation.
I N S T A L L A T I O N Component Video Connection Component Video Y Pb/Cb Component Video Cable Pr/Cr Audio Cable L Audio R Rear Panel Composite Video Cable (Included, Optional) Video In S-Video S-Video Cable (Optional) Method 3 – Component Video Connection to TV • If your TV has no digital video input but has component video inputs, please use a set of component video cable to connect the component video output of the DVD player to the TV.
I N S T A L L A T I O N Connecting to an Audio System Connecting to a Receiver/Amplifier with HDMI Input/Output Rear Panel HDMI Cable HDMI In HDMI Cable HDMI Out 12 HDMI In
I N S T A L L A T I O N Connecting to a Receiver/Amplifier with 7.1ch Audio Input Rear Panel Audio Interconnect Cable L L L CENTER R FRONT R R SURROUND SUBWOOFER S. BACK AUDIO/VIDEO MUL TI-CHANNEL RECEIVER Receiver/Amplifier with 7.1ch Audio Input Method 5 – 7.
I N S T A L L A T I O N Connecting to a Receiver/Amplifier with 5.1ch Audio Input Rear Panel Audio Interconnect Cable L L R R CENTER FRONT SURROUND SUBWOOFER AUDIO/VIDEO MUL TI-CHANNEL RECEIVER Receiver/Amplifier with 5.
I N S T A L L A T I O N Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder Rear Panel Connect one of these cables Coaxial Digital Audio Cable Coaxial In Optical Digital Audio Cable Optical In AUDIO/VIDEO MUL TI-CHANNEL RECEIVER Receiver/Amplifier with Dolby Digital or DTS Decoder Method 7 – Digital Audio Connection • Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF optical digital audio cable to connect one of the digital audio outputs
I N S T A L L A T I O N Connecting to a Stereo or Surround Audio System Rear Panel L Audio Interconnect Cable R AUDIO IN AUDIO/VIDEO MUL TI-CHANNEL RECEIVER Stereo or Surround Audio System Method 8 – Stereo Analog Audio Connection • If your audio system only offers stereo audio inputs, you can connect it to the FRONT/MIXED L/R audio outputs of the DVD player using the supplied Red/White audio cables.
I N S T A L L A T I O N Setting Up the Player - Initial Setup Use the Setup Menu System In many places of this guide, the DVD player’s Setup Menu needs to be adjusted to match your specific audio/video configuration. When asking you to make menu adjustments, we will use the following terminology to indicate the location of the desired function: Setup Menu Name > Menu Item > Submenu Item (or Selection) Setup Menu Name is the actual name of the uppermost setup menu level.
I N S T A L L A T I O N To access the DVD player’s Setup Menu simply press the SETUP button on the remote control. Since some setup menu options can become inaccessible when the player is playing a disc, it is recommended that you operate the setup menu when playback is fully stopped or when there is no disc in the player. 1.
I N S T A L L A T I O N 5. To exit the SETUP menu, press the SETUP button on the remote control. Determine Your Display Type Widescreen, or 16:9 TV Standard Definition, or 4:3 TV For best performance, your OPPO DVD player must be correctly configured for playback even before the first disc is inserted. This is done under General Setup Page > TV Display in the Setup Menu.
I N S T A L L A T I O N TV Screen Appearance 4:3 DVD Content Pan/Scan 16:9 Letterbox Wide Wide/Auto 4:3 16:9 Select the Best Output Resolution One of the major advantages of the OPPO DVD player is its ability to up-convert standard definition video contents stored on the DVD discs to high definition video signal and output it to the TV through HDMI or component output (Restrictions apply to up-conversion over component output – see notes below for details).
I N S T A L L A T I O N 5. The selected output resolution will be briefly displayed on the upper left corner of the TV screen as well as on the DVD player’s front panel display. 6. The currently selected output resolution is also indicated by the front panel resolution indicators. NOTE • • • Some TV sets do not support one or more output resolutions (particularly 480i and 1080p). In this case repeatedly press the HDMI button until a supported resolution is selected.
I N S T A L L A T I O N To get the best possible audio via HDMI, you may need to set the following options on the DVD player’s setup menu, depending on your HDMI-capable receiver configuration: • If your receiver supports HDMI v1.1 Multi-Channel PCM audio, most likely it also support DTS and/or Dolby Digital decoding and has surround speakers. Please set these DVD player options: o Speaker Setup Page > Down-mix to “7.1 CH” or “5.
I N S T A L L A T I O N NOTE HDMI is a wonderful thing. A single cable can transport both audio AND video from your DVD player to your display. Be aware, however, that HDMI is an evolving standard, and there could be compatibility issues. The OPPO DV-980H supports HDMI v1.1 and v1.2a audio. A receiver that supports HDMI v1.1 is required in order to play multi-channel audio for all formats, including DVD-Video/Audio and SACD (SACD DSD audio converted to multichannel PCM). A receiver that supports HDMI v1.
I N S T A L L A T I O N -- Audio Setup Page -EQ Type Sound Field Digital Outupt LPCM Rate Audio Tone Pro Logic II Dolby Digital Setup HDMI Audio None Off Raw 48K 00 LPCM Due to bandwidth limitation of the technology and copyright restrictions, unfortunately it is impossible to send high-resolution multi-channel digital audio from a source like SACD or DVD-Audio to the receiver using this connection method.
BASIC OPERATIONS Disc Playback SACD DVD-A POWER EJECT PLAY STOP 1. Press the POWER button to turn on the DVD player. 2. Press the OPEN/CLOSE (EJECT) button to eject the disc tray. 3. Place the disc with the label side facing up and the record side facing down. 4. Press the OPEN/CLOSE (EJECT) button again to retract the tray. 5. The DVD player reads disc information and starts playback. 6. Depending on the content of the disc, a menu or navigation screen may appear.
B A S I C O P E R A T I O N S DVD Menu Playback DVD-A 1. Some DVD discs contain title menu or chapter menu functions. 2. Press the MENU button on the remote control to display the menu on the TV screen. NUMBERS MENU TITLE ARROW SELECT 3. Make menu selections using the number buttons or navigate the menu using the ARROW buttons, and then press the PLAY or SELECT button to make the selection. RETURN PLAY You may also: • • • Press the TITLE button to return to the disc title menu.
B A S I C O P E R A T I O N S Mute off NOTE Check the MUTE status on the front panel display of the DVD player when there is no audio output. You may also press the MUTE button to verify the MUTE status. OSD (On-Screen Display) DVD-A Press the OSD button on the remote control to show disc information and operation function hints on the TV screen.
B A S I C O P E R A T I O N S Subtitle Selection When playing DVD discs or DivX programs recorded with subtitles, press the SUBTITLE button on the remote control to select the desired subtitle. Each press of SUBTITLE button switches one available subtitle in a looping manner: SUBTITLE Subtitle 01/03: English Subtitle 02/03: Spanish Subtitle Off Subtitle 03/03: French NOTE Availability of subtitle depends on discs and contents. Angle Selection 1.
B A S I C O P E R A T I O N S Zooming the Displayed Frame The feature zooms in or out the displayed frame. ARROW SELECT 1. To change the zoom ratio, press the ZOOM button on the remote control. Each press of the ZOOM button will switch the zoom ratio in the following sequence: 1.0 (No zooming) Æ 1.2 Æ 1.3 Æ 1.5 Æ 2 Æ 2.5 Æ3 Æ 3.5 Æ 4 Æ ½ Æ ⅓ Æ ¼ Æ Back to 1.0 again ZOOM 2. When the frame is magnified, press the ARROW buttons to move the visible area in the frame (Panning).
ADVANCED OPERATIONS TV System Selection While you will want to set the video output system (NTSC/PAL) to the same as that supported by your TV, realize that the DVD player will convert, on-the-fly any content that is not in the format your TV understands. The default output is NTSC for North America. Press the P/N button on the remote control to cycle the video output to PAL, NTSC or AUTO system. The TV screen displays the selected system name.
A D V A N C E D O P E R A T I O N S Slow Playback To slow down the playback speed, please use the following steps. 1. Press the SLOW button on the remote control and the player starts slow playback. Each press of the SLOW button switches the playback speed in the following sequence: PLAY SLOW 2. Press the PLAY button during slow playback to resume normal playback speed.
A D V A N C E D O P E R A T I O N S Repeat the Selected Section SACD DVD-A To repeatedly play a specified section, please follow these steps: A-B 1. During normal playback, press the A-B button on the remote at the desired beginning point (Point A) for the repeat play. 2. When playback reached the desired ending point (Point B) for the repeat play, press the A-B button again. 3. The player now repeatedly plays back the specified section (A-B). 4.
A D V A N C E D O P E R A T I O N S SACD discs Insert disc. After the player begins reading the disc, enter the track number directly and press the SELECT button to select the track for playback. Playback from a Specific Location DVD-A DVD discs You may specify a point to start playback by entering the title, chapter or time directly. 1. Title and chapter search.
A D V A N C E D O P E R A T I O N S CD discs 1. Disc time search • Repeatedly press the GOTO button until the TV screen displays the following picture. Use the NUMBER buttons to enter the MINUTE and SECOND. Disc Go To: --:-2. Track time search • Repeatedly press the GOTO button until the TV screen displays the following picture. Use the NUMBER buttons to enter the MINUTE and SECOND. Track Go To: --:-3. Select a track • Repeatedly press the GOTO button until the TV screen displays the following picture.
A D V A N C E D O P E R A T I O N S Memory and Automatic Resume POWER 1. The DVD player automatically remembers the current position when playback is interrupted. Operations such as EJECT, STOP or turning POWER off will cause the DVD player to save the current playing position. 2. The position is memorized even after turning off the unit or changing the disc. 3. When the next time the disc with a memorized playing position is played back, the DVD player will recognize the saved playing position.
A D V A N C E D O P E R A T I O N S • For example, to navigate to a specific chapter, press the up/down ARROW buttons to select the “Chapter” item, and then press the SELECT button. • Press the NUMBER buttons to select the desired chapter. To select the 4th chapter, press 0 and 4. MENU Video Type Video Scale Title Chapter BITRATE 85 NTSC 4:3 01/01 _0/05 TITLE ELAPSED: 0:01:25 MENU Video Type Video Scale Title Chapter BITRATE 85 NTSC 4:3 01/01 04/05 TITLE ELAPSED: 0:01:25 3.
A D V A N C E D O P E R A T I O N S • • • • • Press the up/down ARROW buttons to select the desired directory and press the SELECT button to enter it. To return to the previous level of directory, select the [ .. ] directory in the first line, or press the left ARROW button. If a directory contains many files, you may press the PREV or NEXT SKIP button to the previous or next page of the directory listing. Press the up/down ARROW buttons to select the DivX, XviD, digital audio or digital picture file.
A D V A N C E D • • O P E R A T I O N S Press the MENU button to stop the slide show and return to the disc navigation menu. Press the ARROW buttons to rotate or flip the picture: o UP: Invert o DOWN: Mirror o LEFT: Rotate counter-clockwise o RIGHT: Rotate clockwise Playing a Disc with Both Digital Audio and Picture Files If the disc contains both digital audio and picture files, you can enjoy both of them simultaneously.
A D V A N C E D O P E R A T I O N S NOTE • • • • This unit supports “USB Mass Storage Class Bulk-Only Transport” devices only. Most USB thumbs drives, portable hard disk drives and card readers conform to this device class. Other USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible. Supported USB drives must be formatted with the FAT (File Allocation Table) or FAT32 file system. Drives formatted with NTFS file system are not supported.
SETUP MENU OPTIONS The Setup Menu of the DVD player presents many setup and configuration options. For most users, the default configuration works well enough and there is no need to change the settings. However if you need to configure the DVD player to perfectly match your home theater settings and viewing preference, please refer to the following sections for details about each configuration option.
S E T U P • • M E N U O P T I O N S Dim - The VFD window is at reduced brightness and the resolution indicators are turned off. Off - All front panel lights and displays are turned off. In this mode the display resumes momentarily when there is any user operation. 5. OSD Mode: To select how long the on-screen display information, such as elapsed or remaining time, stays on the TV screen.
S E T U P M E N U O P T I O N S Speaker Setup Page -- Speaker Setup Page -Down-mix Front Speaker Center Speaker Surround Speaker S. Back Speaker Subwoofer Channel Delay Channel Trim 7.1 CH Large Small Small Small Off 1. Down-mix Mode: To set the audio down-mix mode for converting multi-channel audio into twochannel output. This setting affects the analog and HDMI audio outputs. The options are: • • • • • Lt/Rt – Dolby Pro Logic II Left Total/Right Total.
S E T U P • • M E N U O P T I O N S Small – Choose if the surround speakers are small. Bass frequencies are not passed to the surround speakers to reduce possible distortion. Off – Choose if there are no surround speakers. 5. S. Back Speaker: To set the sound filtering control for the surround back speakers. The options are: • • • Large – Choose if the surround back speakers are large. Bass frequencies are passed to the surround back speakers. Small – Choose if the surround back speakers are small.
S E T U P M E N U O P T I O N S For example, in the above diagram, measure the distance (in feet) from the primary listening position to the Front Left or Front Right Speaker. Your Front Right and Left speakers should measure the same distance. If they do not, please adjust them if possible. Enter the distance of the Front Speakers (n in the above picture) using the left/right ARROW buttons. Next, measure the distance (in feet) from center speakers (o) to the listening position.
S E T U P M E N U O P T I O N S 0.0dB • • • Press the left/right ARROW buttons to select the channel to be adjusted. Press the up/down ARROW buttons to raise or lower the volume of the selected channel in 0.5dB increments. Press the SELECT button to confirm the settings and return to the Audio Setup Page. Channel trim is generally not required since most A/V receivers have the capability to adjust channel trim and compensate for speaker sensitivity differences.
S E T U P M E N U O P T I O N S Audio Setup Page -- Audio Setup Page -EQ Type Sound Field Digital Outupt LPCM Rate Audio Tone Pro Logic II Dolby Digital Setup HDMI Audio None Off Raw 48K 00 Auto 1. EQ Type: To set the equalization pattern type. Available options are: None, Rock, Pop, Live, Dance, Techno, Classic and Soft. 2. Sound Field: To set the sound field effect. Available options are: Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church. 3.
S E T U P M E N U O P T I O N S -- Pro Logic II Config -Pro Logic II Mode Panorama Dimension Center Width Off Music Off 00 03 A. Pro Logic II: To turn on or off the Pro Logic II processing. The options are: • On – Pro Logic II processing is always on • Off – No Pro Logic II processing • Auto – Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected. B. Mode: To set the processing mode of Pro Logic II.
S E T U P M E N U O P T I O N S A. Dual Mono: To choose the output for Dolby Digital discs encoded with two independent audio channels, such as bilingual programs. The options are: • • • • Stereo – Stereo output L-Mono – Left channel output to both Left and Right speakers. R-Mono – Right channel output to both Left and Right speakers. Mix Mono – Left and Right channels mixed to both Left and Right speakers. B. Dynamic: To set the Dynamic Range Compression (DRC).
S E T U P M E N U O P T I O N S Video Setup Page -- Video Setup Page -Sharpness Brightness Contrast Hue Saturation Gamma Color Space Off 00 00 00 00 Off RGB 1. Sharpness: To set the sharpness of video output. Sharpness level can be set with the following options: • Sharp – Enable edge enhancement. Video details are the sharper. May cause slight white line etching around objects. • Soft – Soften edges. Video appears to be smoother but may cause slight loss of details.
S E T U P M E N U O P T I O N S 7. Color Space: To select the color space for the HDMI output. The available options are: • • • RGB 4:4:4 – The HDMI output uses RGB color space. YCbCr 4:4:4 – The HDMI output uses YCbCr 4:4:4 color space. If you select this option please make sure that your TV is configured to accept YCbCr 4:4:4 signals, otherwise the video color will be incorrect. YCbCr 4:2:2 – The HDMI output uses YCbCr 4:2:2 color space.
S E T U P M E N U O P T I O N S Preference Page -- Preference Page -TV Type PBC Audio Subtitle Disc Menu Parental Control Password Default NTSC On English Off English Off The Preference Page can only be accessed when playback is completely stopped, or when there is no disc in the DVD player. 1. TV Type: To set the output video system (PAL/NTSC) to match the type of TV. The options are: • • • Auto – No system conversion is performed. The output video system is the same as that encoded on the disc.
S E T U P • • M E N U O P T I O N S Press the up/down ARROW buttons to select the rating to allow (G/PG/PG 13/PGR/R/NC17/ADULT). The selected rating and below will be allowed, and any rating above the selected will be blocked. Press the SELECT button to confirm the selection. You will be asked for the parental control password. Enter the password (default password: 7890) and press the SELECT button. 7. Password: To set parental control password.
REFERENCES Useful Notes • • • • • In order to prolong the service life of your DVD player, it is recommended to wait at least 30 seconds before you turn it on again after switching it off. Remove disc and turn power off after operation. Some functions of the player may not be applicable to certain discs. Some discs with special features may not be fully supported by the player. This is not a malfunction of the unit.
R E F E R E N C E S Interference from other devices Some setup menu items are grayed out Some setup options cannot be changed while a disc is playing. Some setup options may be mutually exclusive with other setup options. Identify interference by turning off other devices, and then relocate or replace the offending device Fully stop playback, eject the disc and try the setup menu again. 3 17 Specifications Designs and specifications are subject to change without notice.
R E F E R E N C E S Language Code List Code 6565 6566 6570 6577 6582 6583 6588 6590 6665 6669 6671 6672 6678 6679 6682 6765 6779 6783 6789 6865 6869 6890 6976 6978 6979 6983 6984 6985 7065 7073 7074 7079 7082 7089 7165 7168 7176 7178 7185 7265 7273 7282 Language Name Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persi
LIMITED WARRANTY OPPO Digital, Inc. Limited One Year Warranty Your OPPO product has been manufactured to precise standards, and with rigid quality control through every process of manufacturing. It is warranted by OPPO DIGITAL, INC. against defective workmanship or materials for one (1) full year from the original date of purchase. This warranty applies only to OPPO brand products imported or manufactured by OPPO Digital, Inc. and sold to the original consumer purchaser in the U.S.A.
L I M I T E D W A R R A N T Y • If it is determined that your product needs service, a Return Merchandise Authorization (RMA) number will be issued to you along with return instructions and address of an OPPO service center. • Pack the product securely, preferably in the original packaging, with your assigned RMA number marked clearly on the outside of the package. Send the package postpaid and insured to the OPPO service center to obtain warranty service. Thank you for choosing OPPO.