User's Manual

INSTALLATION

Connecting to a TV via HDMI

Rear Panel

HDMI Cable (to HDMI 1 or 2)

HDMI In

Video In

Composite Cable (Optional)

If your TV has an HDMI input, you can use the included HDMI cable to connect the player directly

to the TV. This connection method delivers both video and audio in a pure digital format via a

single cable. The HDMI output of the player allows for the highest possible video quality and audio

resolution.

There are two HDMI output terminals (HDMI 1 OUT and HDMI 2 OUT) on the rear panel of BDP-

105, both of which can be connected to your TV. We recommend using HDMI 1 OUT since it

benefits from the dedicated Marvell

QDEO video processor.

You may remove the HDMI cable and connect the DIAG (diagnostic) output to the TV through a

regular composite video cable (not included) when there is a problem with HDMI video. Only the

Setup Menu will be visible on the TV when using this connection, so it is limited to troubleshooting

purposes only.

NOTE

This connection method will output sound via the TV’s speakers. For optimal sound quality,

it is recommended that audio be transferred from the BDP-105 to an A/V receiver with

connected speakers.

If your A/V receiver does not accept audio via HDMI, or if your receiver does not have

HDMI inputs at all, see pages 16 to 19 for instructions on how to output audio to a

receiver using different connection types.