User's Manual

INSTALLATION
15
Connecting to a TV via DVI
Rear Panel
HDMI (from HDMI 1 or 2) - DVI Cable
Audio Cable
DVI
Audio
DVI
If your TV has a DVI input that supports HDCP, you can purchase an HDMI-DVI cable to connect
the player to the TV. This connection method delivers digital video to the TV without any signal
degradation. We recommend that you use HDMI 1 OUT since it benefits from the dedicated video
processor.
Please use RCA-style cables (not included) to connect the dedicated STEREO AUDIO OUT
terminals of the player to the TV. Make sure the audio cables are connected to the same input
terminal groupon the TV as the DVI input. Usually, the input terminals are marked as “DVI Audio”
or “PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to
connect the audio.
You may connect the DIAG (diagnostic) output to one of your TVs for troubleshooting purpose.
Refer to page 13 for more details.
NOTE
HDCP stands for High-bandwidth Digital Content Protection. The HDMI outputs of the BDP-105
use HDCP to encrypt the digital audio and video content. The TV must support HDCP in order to
decrypt and properly display the content.