User's Manual

ADVANCED OPERATIONS

Memory and Automatic Resume

POWER

OPEN

PLAYSTOP

1. The player automatically saves the current position when playback

is interrupted. Operations such as OPEN and POWER cause the

player to save the current playing position.

2. This position is saved even after turning off the unit or changing

the disc.

3. The next time a disc with a saved playing position is inserted, the

player will resume playback from that point. If you wish to cancel

the automatic resume and start playback from the beginning, you

must press the STOP button when prompted.

4. The player

can save the playback position for up to 5 discs. When

the position from the sixth disc is saved, the oldest saved position

is replaced.

NOTE

Some Blu-ray Discs do not support resuming and will always play from the beginning.

Viewing Pictures on DVD-Audio Discs

PAGE

UP/DOWN

Some DVD-Audio discs contain static pictures, such as photos of the

band as well as album narration. When a DVD-Audio track is playing,

you may use the PAGE UP button to select the previous picture or the

PAGE DOWN button to select the next picture.

NOTE

Availability of static pictures depends on the DVD-Audio disc.

Pure Audio Mode

You can enjoy higher quality audio by turning off the video processing

and output. The Pure Audio mode reduces any potential interference

between the video and audio signals.

1. Press the PURE AUDIO button on the remote control to turn off

video and enter Pure Audio mode. Video output will cease, the

power light will dim and the front panel displays will turn off.

2. Press the PURE AUDIO button again to resume video and

cancel Pure Audio mode.

DVD-A

SACD

DVD-A

SACD