User's Manual

SETUP MENU OPTIONS
55
Video Setup
The Video Setup section of the Setup Menu allows you to configure video output options.
1. Picture Adjustment: Adjusts picture control settings. The BDP-105 provides a wide array of
picture controls. Please refer to the Picture Adjustment section on page 58 for details about
each control.
2. Dual HDMI Output: Allows you to select the output mode when both HDMI Output ports are in
use. If only one single HDMI Output port is active, this selection will not apply.
Split A/V (recommended) – Use HDMI 1 OUT as the dedicated video output port and HDMI
2 OUT as the dedicated audio output port. Thi
s setting will ensure the best possible picture
quality and the highest possible audio resolution.
Dual Display – Send digital audio and video signals to both HDMI Outputs simultaneously.
This setting is only recommended when two HDMI displays are required, since the surround
sound audio signal may be down-mixed to stereo and the original audio quality may be lost.
3. 3D Output: Allows you to choose the video output mode for 3D content.
Auto (default) – Outputs 3D if supported both by both the disc content and the display. The
player automatically checks for the existence of 3D content on the disc and the 3D
compatibility of the TV or projector. If both criteria are met, the player sends 3D video from its
HDMI output terminals; otherwise, only
2D video is sent out. Active shutter 3D glasses
(which are not sold by OPPO) are required to enjoy the 3D movie on your TV.
Off – Always output 2D video format, even when 3D video exists on the disc. This
guarantees the video quality if your TV is not 3D compatible, or if some necessary
components (such as the 3D glasses) are missing.
Forced – Always output 3D video format for 3D Blu-ray Discs. You may experience a black
screen (no video output) if your TV is not 3D compatible.
ᵰᶂᶶᶵᶰ
NOTE
The player can automatically adjust the resolution of digital audio and video signals depending
on the capabilities of the connected television and receivers.
For HDMI 1 OUT, the dedicated QDEO video processor will be used unless Source Direct is
selected, in which case QDEO is bypassed.
In Split A/V mode, HDMI 1 OUT has video only with no audio, but HDMI 2 OUT will have audio
and possibly video. This is because HDMI embeds audio into video data so there must always
be a video signal, even if it’s only a blank screen, to carry audio through.