User's Manual

SETUP MENU OPTIONS

Picture Adjustment Menu for HDMI 2 OUT

To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the

parameter, and use the LEFT/RIGHT ARROW buttons to change its value.

To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to

only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons (except the

Picture Mode, which you will directly see the mode name switches between Mode 1, 2 and 3, and all the

other parameters are adjusted automatically to the stored value). The reduced

menu will be positioned

near the bottom of the screen.

You can continue adjusting the current parameter by pressing the LEFT/RIGHT ARROW buttons. To

select another parameter, press the UP/DOWN ARROW buttons. Press the ENTER button to return to

the main Picture Adjustment menu.

To exit the Picture Adjustment menu and return to the Setup Menu, either select Exit in the menu, or

press the RETURN button.

The following picture adjustment controls are available for both HDMI 1 and 2:

1. Picture Mode: Allows you to choose a customized picture mode saved by you. The BDP-105

allows you to save up to three customized modes. Press the LEFT/RIGHT ARROW buttons to

switch the mode and all parameters will be automatically adjusted to their stored values.

Changes to the current parameter values will be stored automatically when you exit the Picture

Adjustment screenorswitchtoanotherPicture Mode.

2. Brightness: Allows you to adjust the brightness (black level) of the video output.

3. Contrast: Allows you to adjust the contrast (white level) of the video output.

NOTE

Proper brightness and contrast settings are necessary for a quality video output. If you do not

have the correct black and white levels, your images can appear washed out or can lose detail

HDMI 2

Mode 1

Picture Mode

Brightness

Contrast

Hue

Saturation

Sharpness

Noise Reduction

-16

+16

Exit