User's Manual

SETUP MENU OPTIONS
71
Speaker Settings
You can set the size, distance and trim level for each speaker by using the LEFT/RIGHT ARROW
buttons to move the cursor to highlight the speaker and then press the ENTER button. The Speaker
Settings menu on the right side of the screen will be activated. In Speaker Settings, use the UP/DOWN
ARROW buttons to select a parameter, and then press the ENTER button to change it. To exit the
Speaker Settings menu and return to the Speaker Configuration illustration, press the LEFT ARROW
button or select the Exit option. You can also move on to configure the next speaker by selectin
g the
Next Speaker option.
The following speaker parameters can be configured:
1. Size: The following speaker size parameters control bass filtering for the speakers.
x Large – All audio content is passed to the appropriate speaker.
x Small – All audio content, except for bass frequencies, is passed to the appropriate speaker.
The purpose is to reduce possible distortion. If a subwoofer is available, bass frequencies are re-
directed to the subwoofer, otherwise, they are discarded. The bass frequency upper limit is set
by the Crossover Frequency selection in the Setup Menu (see page 73 for details).
x
Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is
redirected to other speakers or discarded if redirection is not possible.
x On (for Subwoofer only) – Specifies that a subwoofer is available.
NOTE
The Size for Front, Surround and Surround Back speakers is configured in pairs. Changes to
the size of one speaker will automatically change the other of the pair.
2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.
The delay is to compensate for the audio propagation time difference caused by the placement of
speakers.
ᶅᶰᶸᶯᵡᶎᶪᶹ
ᶆᶹᶪᶵ