Datasheet

ManualsBrandsOptek ManualsIR LEDsInfrared Emitting Diode 890nm 1.5mm Pill

Hermetic Infrared Emitting

Diode

OP123, OP124, OP223, OP224

Issue B 07/2016 Page 1

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product speciﬁcation without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Description:

Each OP123 and OP124 device is a 935 nanometer (nm) high intensity gallium arsenide infrared eming diode (GaAs),

mounted in a miniature hermecally sealed “pill” package with an enhanced temperature range and a high power output.

These devices are designed for direct mounng to PCBoards.

Each OP223 and OP224 device is an 890 nm gallium aluminum arsenide infrared eming diode (GaAIAs), mounted in a

hermecally sealed “pill” package with an enhanced temperature range and a narrow irradiance paern that provides high

on-axis intensity for excellent coupling eﬃciency. These devices oﬀer signiﬁcantly higher power output than GaAs at

equivalent drive currents and have a wavelength that is matched to silicon’s peak response. Their small package size

permits high device density mounng.

All these LEDs are mechanically and spectrally matched to the OP300 series, OP600 series and OP640 series devices.

Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data, and to

ApplicaƟon BulleƟn 202 for pill-type soldering to PCBoard.

Applications:

• Non-contact reﬂective object sensor

• Assembly line automation

• Machine automation

• Machine safety

• End of travel sensor

• Door sensor

Features:

• Hermetically sealed package

• Mechanically and spectrally matched to other OPTEK devices

• Designed for direct mount to PCBoard

Ordering InformaƟon

Part

Number

LED Peak

Wavelength

Total Beam

Angle

OP123

935 mm

24°

OP124

OP223

890 mm

OP224

Pin # LED

Anode

Cathode

Sensor

Collector

Emitter

INCHES

[MILLIMETERS]

DIMENSIONS ARE IN:

RoHS

Summary of content (4 pages)

PAGE 1
Hermetic Infrared Emitting Diode OP123, OP124, OP223, OP224 Features: • Hermetically sealed package • Mechanically and spectrally matched to other OPTEK devices • Designed for direct mount to PCBoard Description: Each OP123 and OP124 device is a 935 nanometer (nm) high intensity gallium arsenide infrared emi ng diode (GaAs), mounted in a miniature herme cally sealed “pill” package with an enhanced temperature range and a high power output. These devices are designed for direct moun ng to PCBoards.
PAGE 2
Hermetic Infrared Emitting Diode OP123, OP124, OP223, OP224 Electrical Speciﬁcations Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65o C to +150o C Operating Temperature Range -65o C to +125o C Reverse Voltage 2.0 V Continuous Forward Current 100 mA Peak Forward Current (2μs pulse with 0.1% duty cycle) 1.0 A Lead Soldering Temperature [1/16 inch (1.
PAGE 3
Hermetic Infrared Emitting Diode OP123, OP124, OP223, OP224 Performance OP123, OP124 Forward Voltage vs Forward Current vs Temperature Optical Power vs IF vs Temp 4.0 1.8 Normalized at 20 mA and 20o C 1.7 3.5 -65°C -40°C -20°C +0°C +20°C +40°C +60°C +80°C +100°C +125°C 3.0 Normalized Optical Power Typical Forward Voltage (V) 1.6 1.5 1.4 1.3 -65°C -40°C -20°C +0°C +20°C +40°C +60°C +80°C +100°C +125°C 1.2 1.1 1.0 2.5 2.0 1.5 1.0 0.5 0.9 0.
PAGE 4
Hermetic Infrared Emitting Diode OP123, OP124, OP223, OP224 Performance OP223, OP224 Forward Voltage vs Forward Current vs Temperature Optical Power vs IF vs Temperature 1.8 2.0 1.7 1.8 Normalized at 50 mA and 20° C Normalized Optical Power Typical Forward Voltage (V) -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120° C 1.6 1.6 1.5 1.4 1.3 -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120°C 1.2 1.1 1.0 0.9 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.