Datasheet

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com
Issue A.4 8/09
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Photologic® Reflective Object Sensor
OPB715Z, OPB716Z, OPB717Z, OPB718Z
Electrical Characteristics
(T
A
= 25°C unless otherwise noted, see OPL560 series for additional electrical information)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
V
CC
Operating Supply Voltage 4.75 - 5.25 V -
I
CCL
Low-Level Supply Current: - - 30 mA V
CC
= 5.0 V, output open
I
CCH
High-Level Supply Current - - 50 mA V
CC
= 5.0 V, output open
I
OH
High Level Output Current
OPB716
OPB718
-
-
-
-
100
100
µA
µA
V
OH
= 30 V, E
E
= 1 mW/cm
2
V
OH
= 30 V, E
E
= 0
I
OS
Short Circuit Output Current
OPB715
OPB717
-
-
-
-
100
100
µA
µA
V
CC
= 5.0 V, V
CH
= 5 V
V
OH
High Level Output Voltage
OPB715, OPB717
OPB716, OPB718
V
CC
-
2.1
V
CC
-
2.1
-
-
-
-
V
V
I
OH
= -1 µA, E
E
= 1 mW/cm
2
I
OH
= -1 µA, E
E
= 0
V
OL
Low Level Output Voltage
OPB715, OPB717
OPB716, OPB718
-
-
-
-
.4
.4
V
V
I
OL
= 16 mA, E
E
= 0
I
OL
= 16 mA, E
E
= 1 mW/cm
2
E
eT(+)/
E
eT(-)
Hysteresis Ratio 11.20 1.55 2 - -
Notes:
(1) Derate linearly at 5.0 mW / °C above 25° C.
(2) Terminating wire is 7 strand, 26 AWG, UL 1429.
(3) Tested at d = 0.55” (12.7 mm) from a 90% diffuse, white test surface. Reference: Eastman Kodak Catalog #E 152 7795.
(4) No reflective surface.
Absolute Maximum Ratings (T
A
=25°C unless otherwise noted)
Storage & Operating Temperature Range -40° C to +85° C
Supply Voltage, V
CC
(not to exceed 2 seconds) 10 V
Power Dissipation
(1)
300 mW
Output Voltage (Open-Collector only) 35 V