Datasheet

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com
Issue E 07/2013
Page 5 of 10
Reflective Object Sensor
OPB703 through OPB705, OPB703WZ through OPB705WZ,
OPB70AWZ through OPB70HWZ
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.82 mW/° C above 25° C.
(3) The distance from the assembly face to the reflective surface is d.
(4) Crosstalk (I
CX
) is the collector current measured with the indicated current in the input diode and with no reflecting surface.
(5) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: East-
man Kodak, Catalog # E 152 7795.
(6) All parameters tested using pulse techniques.
Electrical Characteristics (T
A
= 25° C unless otherwise noted)
(OPB70AWZ)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode (See OP265 for additional information — for reference only)
V
F
Forward Voltage - - 1.7 V I
F
= 40mA
I
R
Reverse Current - - 100 µA V
R
= 2 V
Output PhotoDarlington (See OP535 for additional information — for reference only)
V
(BR)CEO
Collector-Emitter Breakdown Voltage 15 - - V I
CE
= 1.0 mA, E
E
=0
V
(BR)ECO
Emitter-Collector Breakdown Voltage 5 - - V I
EC
= 100µA, E
E
=0
I
CEO
Collector Dark Current - - 250 nA V
CE
= 10 V, I
F
= 0, E
E
=0
Coupled
I
C(ON)
On-State Collector Current 5.0 - 26.0 mA V
CE
= 5 V, I
F
= 40mA , d = 0.15”
(2)(5)
I
CX
Crosstalk - - 25 µA V
CE
= 5 V, I
F
= 40mA
(4)
V
(SAT)
Saturation Voltage - - 1.15 V I
C
= 400 µA, I
F
= 40mA , d = 0.15”
(2)(5)