Datasheet

Six-Element SMD Photodiode
Array
OPR2100, OPR2100T, OPR2100HS,
OPR2100HST
© TT electronics plc
Issue E 11/2016 Page 1
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: [phone]
www.electronics.com | sensors@electronics.com
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
Descripon:
Each OPR2100 device is a six-element photodiode that is designed to meet the needs of motor encoder applicaons.
Designed specically for industrial encoder applicaons, the OPR2100 features a high temperature SMD chip carrier, a
temperature range and a low leakage current that can withstand extreme operang condions.
These devices have an opaque chip carrier that encloses six individual chips, which are mounted on isolated cathode
contacts to allow external connecon in any desired conguraon. The opaque polyimide package shields the photodiodes
from stray light and can withstand mulple exposures to the most demanding soldering condions, while the gold-plated
wraparound solder pads provide exceponal storage and weng characteriscs.
See Applicaon Bullen 237 for handling instrucons.
Applicaons:
 Motor encoder applicaons
 Industrial encoder applicaons
Features:
 Six-PIN photodiode array
 High-temperature chip carrier
 Closely matched responsivity between elements
 Choice of low or high speed
 Easily mountable in any conguraon
 Suitable for harsh industrial operang condions
Ordering Information
Part
Number
Sensor
# of
Elements
Responsivity
(mA/mW) Min
Reverse Voltage
Breakdown
Active Area
mm
2
(each)
Packaging Bandwidth
OPR2100
Photodiode Array
6 0.45 50 3.45 Tube 55kHz
OPR2100T
Photodiode Array 6 0.45 50 3.45 Tape & Reel 55kHz
OPR2100HS
Photodiode Array 6 0.45 50 3.45 Tube 200kHz
OPR2100HST
Photodiode Array 6 0.45 50 3.45 Tape & Reel 200kHz