Datasheet

ManualsBrandsOptek ManualsLEDsLED 525nm Green 3 mm T-1

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

Issue C 03/2013

Page 1 of 9

Round Through-Hole LED Lamp

(3 mm)

Part Number Material Emitted Color Intensity Typ. mcd Lens Color

OVLBB4C7

InGaN

Blue 1800 Clear

OVLBG4C7

Green 8400 Clear

OVLBR4C7

Red 3700 Clear

OVLBY4C7

Yellow 3700 Clear

AllnGaP

OVLBx4C7 Series

• High brightness with well-defined spatial radiation patterns

• UV-resistant epoxy lens

• Lead-frame material is iron alloy with tin plated leads

• No stand-offs

Each OVLBx4C7 series device is a high-intensity LED mounted in a clear plastic T-1 package. The LED provides

a well-defined and even emission pattern. Its UV-resistant epoxy lens makes this device an optimal solution for

outdoor applications.

Applications

• Pedestrian signals

• Signage and architectural lighting

• Backlighting

• Automotive

• Outdoor/indoor displays

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

RoHS

General tolerance +/- .25mm unless specified

Dimensions are in Inches [MM]

Summary of content (9 pages)

PAGE 1
Round Through-Hole LED Lamp (3 mm) OVLBx4C7 Series • • • • High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Lead-frame material is iron alloy with tin plated leads No stand-offs Each OVLBx4C7 series device is a high-intensity LED mounted in a clear plastic T-1 package. The LED provides a well-defined and even emission pattern. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications.
PAGE 2
Round Through-Hole LED (3 mm) OVLBx4C7 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Max (Device not designed for reverse voltage applications) Continuous Forward Current (Design of heat dissipation should be considered) Peak Forward Current (10% Duty Cycle, 1 kHz) Power Dissipation Blue, Green 25 mA Red, Yellow 50 mA Blue, Green 100 mA Red, Yellow 100 mA Blue, Gre
PAGE 3
Round Through-Hole LED (3 mm) OVLBx4C7 Series Standard Bins LEDs are sorted to luminous intensity (IV), forward voltage (VF) and dominant wavelength (nm) bins listed below. Each bag consists of a single intensity bin, single voltage bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins, single voltage bins or single color bins.
PAGE 4
Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (BLUE) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 4 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.
PAGE 5
Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (GREEN) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.
PAGE 6
Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (RED) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 6 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.
PAGE 7
Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (YELLOW) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.
PAGE 8
Round Through-Hole LED (3 mm) OVLBx4C7 Series Beam Pattern: (Blue) and (Green) (Red) and (Yellow) Packaging: 500 pcs per bulk bag with desiccant Desiccant Barcode Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 8 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.
PAGE 9
Round Through-Hole LED (3 mm) OVLBx4C7 Series Reliability Test LED lamps are checked by reliability tests based on MIL standards. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.