User Manual

ManualsBrandsOptex ManualsElectronicsISeries IP Receiver for Milestone XProtect VMS and BTX Software Bundle

Table Of Contents

Notice
Document Part Number
Trademarks
Technical Services Contact Information
Document Conventions
EN6080 Area Control Gateway Overview
1.1 Introduction
1.2 Recommended System Requirements
1.3 EN6080 Area Control Gateway Initial Setup and Connection
1.3.1 Configure Network Settings (for Windows 7)
1.3.2 Disable Delayed ACK Mode on the Windows® 7 Operating System
1.3.3 Browse to the EN6080 Area Control Gateway Web Server Screens
1.3.4 License Key Setup
Home
2.1 Home
2.1.1 System Connection Summary
2.1.2 Device Information
2.2 Site Information
2.2.1 ACG Information
2.2.2 Contact Information
ACG Setup
3.1 User Administration
3.1.1 Update User or Admin Password
3.2 IP Administration
3.2.1 Configure a Static IP Address
3.2.2 Configure a DHCP IP Address
3.3 Date and Time Setup
3.3.1 Poll NTP Servers for Time and Date
3.3.2 Synchronize Time and Date with your PC
Partitions
4.1 Partitions
4.2 Define a New Partition
4.3 Assign Devices to a Partition
4.4 Remove Devices from a Partition
4.5 Update a Partition
4.6 Delete a Partition
Wireless Setup
5.1 Wireless Setup
5.1.1 Update the NID
Device Setup
6.1 Manual Administration
6.1.1 Manually Register a Device
6.1.2 Unregister a Registered Device
6.2 Automatic Administration
6.2.1 Start Discovery
6.2.2 Edit and Register the Devices
6.2.3 Unregister a Registered Device
6.3 Upload Administration
6.3.1 Upload a Spreadsheet of Devices to Register
Logs
7.1 Logs
7.2 Alarm Logs
7.2.1 Retrieve and Save Logs
7.3 System Logs
7.3.1 Retrieve and Save System Logs
7.4 Trouble Logs
7.4.1 Retrieve and Save Trouble Logs
File Management
8.1 System and Configuration Files
8.1.1 Back Up Configuration Files
8.1.2 Restore Configuration Files
8.2 Firmware Update
8.2.1 Update Firmware

Partitions

4.5 Update a Partition

The name of an assigned partition may be edited. To edit an existing partition:

1. Click the partition you wish to update.

2. Click “Edit.”

3. Edit the name of partition in the pop-up text field.

4. Click “Update.”

Once edited, the ID number assigned when the partition was created will

remain the same.

4.6 Delete a Partition

All devices must be removed from a partition before it can be deleted. To

delete a partition:

1. Click the partition you wish to delete.

2. Click “Delete.”

3. Click “OK” to confirm deletion.