Manual

-8-
HX-40
HX-40AM
PIR SENSITIVITY
SELECTOR
8-E PIR SENSITIVITY
POSITION
HIGH
MIDDLE
(factory default)
LOW
Suitable for hostile and narrow area
FUNCTION
Suitable for
sites requiring greater sensitivity
applications
Suitable for standard applications
LOW
MIDDLE
HIGH
ON
(factory default)
POSITION
OUTPUT TERMINAL
OFF
TROUBLE
TROUBLE and ALARM
Use this when not wiring a dedicated trouble input
terminal on the control panel.
ON
OFF
Dip switch
4
8-D TROUBLE OUTPUT
HX-40
HX-40AM
Red
Red
Trouble output is used for anti-masking signal.
When an object is placed close to the lens surface, for a period of
more than 180 seconds, the IR Anti-Masking circuit will activate and
generate a trouble signal.
LED Operation>>
DETECTOR STATUS
Anti-Masking booting
(Anti-Masking start up)
Anti-Masking
LED Indication
Red blinks 2 times and goes
off for 5 sec.
This movement is repeated.
Red blinks 3 times and goes
off for 3 sec.
This movement is repeated.
LED operation
ANTI-MASKING
SENSITIVITY SELECTOR
POSITION
HIGH
STD
(factory default)
OFF
FUNCTION
Suitable for site requires greater sensitivity
applications.
Suitable for standard applications.
Suitable for site requires no anti-masking function.
OFF
STD
HIGH
8-F ANTI-MASKING
HX-40
HX-40AM