Manual

-4-
2-2
BATTERY PREPARATION
Type CR123A CR2 1/2AA 1/2AA(*1)
Voltage
3.0VDC 3.0VDC 3.6VDC
7.2VDC(*1)
Number of
cells to use
3 cells 3 cells 3 cells 6 cells(*1)
-Battery Sharing Possible Case
Power supply is available from the battery box to both HX-40RAM and the transmitter.
HX-40-RAM Main unit
Transmitter
HX-40RAM Battery box
POWER
INPUT
POWER
OUTPUT
ALARM
Dummy battery
*1: 3.6 VDC 1/2 AA battery in series.
Note that the battery type shall be the same as
that used for the transmitter.
(See P5)
Not
used
HX-40RAM Main unit
Transmitter
HX-40RAM Battery box
POWER
INPUT
TROUBLE
OUTPUT
ALARM
-Battery Sharing Impossible Case
Separate batteries for HX-40RAM and the transmitter.
Type CR123A
Voltage
3.0VDC
Number of
cells to use
3 cells
POWER
OUTPUT
If CR123A battery cells are unavailable, three CR2
battery cells (3.0 VDC) can be substituted.
Do not use 1/2AA batteries.
* Do not use the attached dummy batteries or battery
lead.
(See P6)
INSTALLATION
3
DETERMING THE DETECTION LENGTH
MOUNTING THE BATTERY
MOUNTING THE TRANSMITTER
AND THE BATTERY BOX
MOUNTING THE BRACKET
ADJUSTING THE VERTICAL ANGLE
-Battery Sharing Possible Case
-Battery Sharing Impossible Case
-Installation procedure