Manual

-5-
1
3
2
11
2
Apply masking seal to set the detection length directly on lens. To set an length shorter than
the standard 12 meters, select one of the three patterns and apply the appropriate masking
seal to the lens.
9.0 m (30 ft.)
3.0 m (10 ft.)
5.5 m (18.3 ft.)
3.0 m (10 ft.)
4.0 m (13.3 ft.)
3.0 m (10 ft.)
3-1
DETERMING THE DETECTION LENGTH
Do not use batteries of different capacities (i.e.: mixing new and used batteries) or of
different manufacturers and/or types together. Not observing the above may result in
an explosion, leakage of electrolyte, emission of toxic gases or other outcomes that
may be harmful to people and property.
Warning
-Battery Sharing Possible Case
3-2
MOUNTING THE BATTERY
1
2
3
Remove the battery box from the main
unit.
Remove the battery box cover.
Mount batteries and put the cover onto
the right position indicated on the side of
the battery box.
Hook the cover firmly by the claws on the
right and left sides.
Open the claws (at 2 places).
Open the claws (at 2 places) slightly.
Disengage the bosses
(at 2 places).
CR123A×3 (3.0VDC) CR2×3 (3.0VDC)
1/2AA
×3 (3.6VDC) 1/2AA×6 (7.2VDC×3) (*1)
Pull
Lift and remove
Do not contact the ends of the red
and black wires to avoid short-
circuit.
Caution>>
4
Open the transmitter cover and remove
the battery.
*1: 3.6 VDC 1/2 AA
battery in series.