Manual

-15-
SPECIFICATIONS
5
* Specifications and design are subject to change without prior notice.
HX-40RAM
Passive infrared
12 m (40 ft.) 85° wide / 94 zones
4 m, 5.5 m, 9 m, 12 m (13 ft, 18 ft, 30 ft, 40 ft.)
0.3 – 1.5 m/s (1 – 5 ft/s)
2.0°C (3.6°F) at 0.6 m/s
3 – 7.2VDC Lithium Battery (CR123A×3, CR2×3, 1/2AA×3, 1/2AA×6)
2.5 – 9VDC
30µA(standby) / 4 mA (max) at 3VDC
2.0 ± 1 sec
Approx. 90 sec(LED blinks)
Form C -Solid State Switch- 10VDC 0.01A max
N.C./N.O. Selectable -Solid State Switch- 10VDC 0.01A max
Form C. 28V DC, 0.1A max. changes when cover removed.
Disable: During normal operation.
Enable: During WALK TEST or LED SW on.
Red: Warm-up, Alarm, Trouble, Low battery
No alarm 10 V/m
-20 – +60°C (-4 – +140°F)
95% max
IP55
Wall (Outdoor, Indoor)
2.5 - 3.0 m (8.3 - 10 ft.)
Vertical: ± 20° Horizon: ± 95°
600 g (21.2 oz)
Bracket, Hood, Area masking seal, Screw kit (3×10-2, 4×20-4)
Velcro tape×2, Alarm cable, Battery lead×2, Dummy battery kit
Model
Detection method
PIR Coverage
Distance limit
Detectable speed
Sensitivity
Power input
Operating Voltage
Current draw
Alarm period
Warm-up period
Alarm output
Trouble output
Tamper output
LED indicator
RF Interference
Operating temperature
Environment humidity
Weatherproof
Mounting
Mounting height
Bracket adjust angle
Weight
Accessories
5-1
SPECIFICATIONS