User Manual

ManualsBrandsOptex ManualsAccessoriesiVision+ Connect Door Interface

No.59-2725-3 1903-06

SETTINGS and INSTALLATION GUIDE

Door interface

IVPC-DI

This guide covers the installation and setup for the door interface unit of the IVPC system. The IVPC-DI can be used

as a chime, dry relay output, or both. Common applications are for switching power to a maglock or a door strike.

Please see the example circuits below for ideas.

Introduction

General Information

Mode switch

Pairing switch

Volume +/- button

(mute and 3 steps)

LED indicator

Speaker

Terminal; Power input

Mounting plate

Terminal; Relay output

- During volume adjustment, the default type of

tone sounds regardless the selected type of tone.

- A confirmation beep sounds when the unit is muted.

What to expect

Mounting and wiring;

mount the IVPC-DI, connect power wires and signal wires to external devices.

Pairing;

pair the IVPC-DI to the IVPC-DS, using the IVPC-MS or using the OPTEX Vision App.

Operation check;

test the performance of the IVPC-DI and external devices of the system.

- 1 -

COM

N.O.

COM

Magnetic Lock

Door Strike

N.C.

Relay output wiring examples

LED indications

Power on

(Before pairing)

Power on

(Pairing completed)

Pairing success

[tone 1]

Pairing failure

[Beeps]

Tone/unlock

[tone 1 to 5, or mute]

Parts indications

Power supply

Screws & anchors

< Accessories >

Blinking (Red)

Solid light (White)

Blinking (Blue)

Blinking (Red)

Blink once (Red)

Summary of content (4 pages)

PAGE 1
No.59-2725-3 1903-06 SETTINGS and INSTALLATION GUIDE EN Door interface IVPC-DI Introduction This guide covers the installation and setup for the door interface unit of the IVPC system. The IVPC-DI can be used as a chime, dry relay output, or both. Common applications are for switching power to a maglock or a door strike. Please see the example circuits below for ideas.
PAGE 2
1 Mounting and wiring 1 Turn off all equipment including 2 Remove the main unit 3 Pass the wires through and fix the mounting plate to the wall. from the mounting plate. the external devices of the system. OFF 1 Slide up. 2 Pull off. 5 Mount the main unit on the mounting plate. 4 Wire to the terminals. N.O. (ex. Strike) 6 Turn on all equipment. Attach COM 1 N.C. (ex. Maglock) Power 10 to 24 V AC/DC Polarity is not a concern. 2 Slide down.
PAGE 3
4 916 MHz signal between IVPC-DS and IVPC-DI Operation check 1 2 Wi-Fi signal between IVPC-DS/MS/OPTEX Vision App ♬ 1 Chime sound 1 Push the doorbell button on the IVPC-DS. 2 Confirm the chime tone on the IVPC-DI. 2 2 Door strike 1 1 Push the door release button on the screen of the IVPC-MS or the OPTEX Vision app. 2 Confirm the door has been released. FCC Statement This device complies with Part 15 of the FCC Rules.
PAGE 4
<< Specifications >> Model 28 (1.10) 98 (3.86) 80 (3.15) 110 (4.33) Unit: mm (inches) IVPC-DI Frequency 916 MHz Power 10 to 24 V AC/DC, 500 mA max. Chime tone * 5 types selectable Chime volume Approx. 80 dB max. 3 levels and mute Relay output duration * 1/ 5/ 10/ 30/ 60 s selectable Relay output rating 1C relay, 1 A max.