Manual

- 12 -
OPTEX CO., LTD. (JAPAN)
(ISO 9001 Certified)
(ISO 14001 Certified)
5-8-12 Ogoto Otsu
Shiga 520-0
101
JAPAN
TEL:[phone]
FAX:+8
1-77-579-8190
URL:http://www.optex.co.jp/e/
OPTEX INCORPORATED (USA)
TEL:[phone]
Tech:[phone]
URL:http://www.optexamerica.com
OPTEX (EUROPE) LTD. (UK)
TEL:[phone]
URL:http://www.optexeurope.com
OPTEX SECURITY SAS (FRANCE)
TEL:[phone]
URL:http://www.optex-security.com
OPTEX SECURITY Sp.z o.o. (POLAND)
TEL:[phone]
URL:http://www.optex.com.pl
8-1 SPECIFICATIONS OF THE MAIN UNIT
Model RLS-3060
Detection method Infrared Laser Scan
Laser protection
class
Class 1
Wavelength of laser
emission
905 nm (infrared laser)
Coverage for vertical
mounting
Radius: 30 m (Approx. 100 ft.), Arc: 190
°
Coverage for
horizontal mounting
MAX. 60 m (Approx. 200 ft.)
Detection resolution 0.25°
Power input 24V AC/DC ± 10%
Power consumption 400 mA (24VDC) 600 mA (24VAC)
Vertical mounting
height
15 m (Approx. 50 ft.) max
Horizontal mounting
height
0.7 m (28 in.) (recommended)
Indicator
A2 alarm
Red LED
A1 alarm
B1 alarm
B2 alarm
Status Yellow LED
Power Green LED
Area alarm output N.O. 28V DC, 0.2A × 4outputs
Master alarm output Form C, 28V DC, 0.2A max.
Trouble output Form C, 28V DC, 0.2A max.
Tamper output N.C. 28V DC, 0.1A max.
Environmental
disqualication
circuit
Form C, 28V DC, 0.2A max.
Alarm period Approx. 2 sec. Off delay timer
Warm-up period Approx. 30 sec.
Operating
temperature
-20 – +60 °C (-4 – +140 °F)
IP rating IP65
Dimensions
(H × W × D)
334 × 144 × 155 mm
(13.2
× 5.7 × 6.1 in.)
Weight 3 kg (106 oz.)
Accessories
Mounting screw, anchor bolt for board,
paper template, waterproof plug and
Installation Instructions
* Specifications and design are subject to change without prior
notice.
8-2 DIMENSIONAL DRAWING
8-3 OPTIONS
OPM-WT : Audio Walk Tester
RLS-PB : Pole mount bracket
RLS-SB
: Adjustable angle mounting bracket
SPECIFICATIONS
8
7-3 SYSTEM FUNCTION AFTER POWER FAILURE
H1 Manual H1 Auto H2 Manual H2 Auto V Auto
Even if the power is shut down during the security protection
process (detection area is specified) due to reasons including
power failure, the specified detection area is saved on this
product. After power is restored, the product resumes intruder
detection normally in the detection area that was specified prior
to the power failure.
144
(5.7)
155
(6.1)
64
(2.5)
18
(0.7)
334
(13.2)
135
(5.3)
92
(3.6)
107
(4.3)
Unit:mm (inch)