Manual
- 2 -
- 3 -
TYPES OF INSTALLATION METHOD AND DETECTION AREAS
2
1-2
PRECAUTIONS
Install the product only on a
solid surface.
In the Horizontal Detection
Area, this product must
normally be used within the
recommended installation
height in order to detect an
intruder.
Install the product so that the
detection area is not inuenced
by interference from tall grass
or tree branches waving in the
wind.
Do not install or leave the
product in a location exposed
to heat, vibrations or impacts
beyond the noted rating.
Do not use the product in an
environment where solvent
fumes or corrosive gases are
present.
Do not use this product in
environments where there
may be oil mist particles which
may contaminate the window
of the detector; thus causing
detection errors and possible
corrosion which may lead to
product failure.
The symbol “Í” indicates prohibited actions.
Cleaning the Product
Clean the front window on a regular basis
using a wet cloth.
A smeared front window can limit the
detection area due to the reduced laser
sensitivity. In addition, heavy soiling of the
window can induce detection errors.
On Safety of Laser
This product is categorized as a Class 1 product in terms of the
Safety Standard.
Average Power : Max. 0.015 mW (AEL)
Wavelength : 905 nm
Pulse With : 4 ns
Emission period : 36 μs
Standard : IEC60825-1
Class 1 of the Laser Safety Standard means that the safety
of laser products belonging to this class is warranted under
normal operating conditions (reasonably predictable operating
conditions). The user is simply required to indicate that this
product is laser equipment. No additional safety measures are
necessary.
Certied to FDA (21 CFR part 1040.10 and 1040.11)
Class 1 laser product
Do not expose your eyes directly to the laser beam.
1-3
PARTS IDENTIFICATION
Accessories>>
2-1
TYPES OF INSTALLATION METHOD
Installing to a wall Installing to a pole
Installing at an angle to a wall Installing at an angle to a pole
Installing to a ceiling plane
Installing at an angle to a
ceiling plane
Installation height:
0.7 m to 1 m
(2.3 ft. to 3.3 ft.)
Front window
Mounting bracket Main unit
Cover
Cover mounting screw
Main unit mounting screw
Angle adjustment screw
4 screws
(For locking the
mounting bracket)
4 anchors
for the board
1 paper template 2 cable glands
Detection method
Detection method
Horizontal Detection Area 1
Horizontal Detection Area 2
Horizontal Detection Area 1
Horizontal Detection Area 2
Detection method
Detection method
Vertical Detection Area
Vertical Detection Area
Laser beam
Laser beam
Laser beam
Laser beam
Detection method
Detection method
Vertical Detection Area
Vertical Detection Area
Laser beam
Laser beam
Bracket is optional item.
Bracket is optional item. Bracket is optional item.
Bracket is
optional item.