Manual

- 6 -
- 7 -
ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL
MASKING THE FAR AREA SENSOR
The far area mirror mounted in the main unit has 2 far masking
plates; one at the right side of this mirror and the other at the left
side of this mirror. You can mask the detection area by changing
the position of these masking plates.
Cautions>>
You can only mask the detection area from its outside to
its inside using the masking plates. You cannot mask only
the inside detection area.
However, if you need to mask the inside detection area
only, use the white space (margin) of the near area
masking seal (an accessory) for the masking. Attach the
seal and mask all mirrors that you need to shield.
Cautions>>
The window is linked to the main unit by nylon wire loop
so that the window does not fall. Do not pull the window
usingexcessiveforce.
After you have masked the detection areas, mount the
windowandplacetheexcessivenylonwireloopinside
the main unit.
How to remove the window>>
Applicable models
SIP-3020WF SIP-4010WF SIP-404WF
34 12567
10 [m]
15
50510
15
[ft.]30
20
10 0 10
20
30 40
5050
40
7
6
5
1
4
2
3
•
•
•
•
7
Applicable models
SIP-3020WF SIP-4010WF SIP-404WF
1234
[m]505
[ft.]10 0 10
[m]
5
0
5
[ft.]10 0 10
432
3
2
1
SIP-4010WF SIP-404WF
Far area mirror
Rib
Rib
Window
Press the left bottom hole with your
nger,andpullthewindowup.
2 Attach the masking plate to the mirror,
and secure it to the ribs.
3Insertthexingrubberformtosecure
the knob of the masking plate.
1 Remove the masking plate from
the storage, and check the
detection area and the mirror you
use by referring to the area chart.
Far area mirror
Rib
Rib
If tree branches or other moving objects
are in the path of the detection beam.
Attach the masking plate to the mirror,
and secure it to the ribs.
 Insertthexingrubberformtosecure
the knob of the masking plate.
Remove the masking plate from the
storage, and check the detection
area and the mirror you use by
referring to the area chart.
2
3
1
If tree branches or other moving objects
are in the path of the detection beam.
REDWALL-V_SP-WF_EN.indd 7 2009/05/19 15:50:30