Spec Sheet

ManualsBrandsOptex ManualsBurglar Alarms100ft Outdoor / 200ft Indoor Hybrid Battery-Powered Photoelectric Detector

HYBRID

PHOTOELECTRIC

BEAM SERIES

The SL-TNR series offers a cost-effective and

versatile solution for protecting a perimeter line

up to 200ft long, where cabling is an issue or

inconvenient.

Ideal for small perimeters, flat roofs, and open

areas, the active infrared dual beam set offers a

lot of flexibility with its hybrid power options,

where the transmitter is powered by Saft LSH-20

batteries, and the receiver can be hardwired.

The SL-TNR series utilizes high-grade aspherical

lenses and also has an anti-frost design with IP65

weather protection to improve its durability during

harsh weather conditions.

Smart Line™ Series

SL-100 TNR

100ft (30m) Model

SL-200 TNR

200ft (60m) Model

Active Infrared Protection with

Flexible Power

Summary of content (4 pages)

PAGE 1
Smart Line™ Series SL-100 TNR 100ft (30m) Model SL-200 TNR 200ft (60m) Model HYBRID PHOTOELECTRIC BEAM SERIES Active Infrared Protection with Flexible Power The SL-TNR series offers a cost-effective and versatile solution for protecting a perimeter line up to 200ft long, where cabling is an issue or inconvenient.
PAGE 2
GREAT FLEXIBILITY WITH POWER OPTIONS HYBRID ⸺ Hardwired Receiver For site configurations where one beam is close to a main power source but the other beam needs to be wireless. The SL-TNR offers the option to hardwire the infrared beam receiver with the included PCU-5 power converter. WIRELESS ⸺ With High Density Lithium Batteries The SL-TNR series has been designed to work with D-size lithium batteries, and OPTEX recommends the Saft LSH-20 battery.
PAGE 3
WIRELESS-READY How to Add the SL-TNR to Your Wireless Enabled Alarm Panel To easily connect a battery-powered SL-TNR to your wireless panel, please follow the steps below: Use a two-input wireless door contact or universal wireless transmitter 1. Take one of your panel manufacturer’s wireless transmitter 2. Register the wireless transmitter on the wireless alarm panel 3.
PAGE 4
ACCESSORIES BCU-5 DIMENSIONS Battery Common Unit Included For iSeries The BCU-5 allows sharing of power source and lowbattery signals between the beam and the wireless transmitter. PCU-5 Power Convert Unit Included for Hybrid The PCU-5 is a voltage converter needed to hardwire the receiver and transmitter SPECIFICATIONS LSH-20 Saft D Size Lithium Battery For iSeries: 2 Included per Side For Hybrid: 2 Included for the Transmitter Unit D cell 3.