User's Instructions

Assembly & User Instructions - Please keep for future reference

725/9256

OPTI 6 X 4 QUICK ASSEMBLY FOOTBALL GOAL

Important – Please read these instructions fully before assembly or using

These instructions contain important information which will help you get the best from your

equipment and ensure safe and correct assembly, use and maintenance.

If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020

Components - Parts

Assemble Instructions

Issue 1 9/26/16

-Small parts

- Net Clip x 18

- Ground Pegs x 4

- Net x 1

- CROSSBAR X 1D

- GROUND BAR X 1

C E

- Support

Bar x 2

- Nut & bolt set x 8

- Carry Bag x 1

1. Layout the 6 sections of tubes which include crossbar, ground

bar, left hand, right hand upright posts and two support bars.

2. Connect together the tubes attached by the elastic cord, making

sure the button clip is securly located.

3. Fit the left (C) and right (E) upright post assembly to the crossbar

assembly (D). Also attach the ground bar (D) as shown below.

PAGE 1
OPTI 6 X 4 QUICK ASSEMBLY FOOTBALL GOAL Assembly & User Instructions - Please keep for future reference Components - Parts 725/9256 D - CROSSBAR X 1 A - Nut & bolt set x 8 D - GROUND BAR X 1 B - Net x 1 G - Ground Pegs x 4 F C - Support Bar x 2 E N - Net Clip x 18 P - Carry Bag x 1 Assemble Instructions -Small parts 1. Layout the 6 sections of tubes which include crossbar, ground bar, left hand, right hand upright posts and two support bars. 2.
PAGE 2
Assemble Instructions 6ft x 4ft EASY ASSEMBLE GOAL 4. Attach the remaining two support bars (F) onto the goal frame and secure with the nut and bolt (A). When assembling support bars (F) make sure the washers are on either side of the tube, under the head of the bolt and wing nut (A). D F F F A E C D A D C 5. Drape the goal net (B) over the frame, make sure the red net tabs are top left and top right of the goal. The seam of the net should follow the frame supports.