User's Instructions

Table Of Contents

Care and Maintenance

During your workout, if you find the running belt is not running smoothly, that means the motor belt is

loose, please follow the below steps to adjust the motor belt tension:

1. Before adjusting the motor belt, loosen the screws that hold the motor cover, and then open the motor

cover.

2. Loosen bolts no. 71 with inner hexagon bolts, then rotate bolts no. 73 in the direction of the arrow,

tightening the belt.

3. After the adjustment, tighten the no. 71 bolt to ensure that the motor and drum are parallel.

4. Re-Start the treadmill and run on the treadmill; if the running belt is still not working properly, repeat

above step.

5. Please do not make the motor belt too tight; if the belt is over tightened, it will cause the treadmill over

loading and reduce the motor life.

Motor Belt Tension Adjustment