User Manual

7
Dome
A. Insert the Handle bar shaft (12) through the Left Handlebar Tube (4L), the Main Frame (1)
and the Right Handlebar Tube (4R) as shown in the diagram. Then fix with
Tube
and attach to the Crank
Cover the hing bolt (41L/R)
(27) using Wave washer
with the S18 Plastic Cap (60) x 2. Cover the Bolts (49) and Nuts (45) at the front of the Pedal
tube (6L/R) with S16 Plastic Cap (59) x 4.
Note: To tighten the Pedal Hinge Bolt (41L/R), turn Counter-clockwise for the left side and turn
Clockwise for the right side.