User's Instructions

Assembly Instructions
12
Step 5
Note:
(72 L/R) for each side to secure
the complete assembly. Cap the
Nylon Nut with 1 x S9 Round
Cap (13) to each side.
One Bolt is supplied with a
RIGHT HAND THREAD for
the RIGHT HAND SIDE and
must be fitted by turning
CLOCKWISE. The other Bolt
is supplied with a LEFT HAND
THREAD for the LEFT HAND
SIDE and must be fitted by
turning ANTI-CLOCKWISE.
Ensure that the Shouldered
Bolts are fully tight before finally
securing the Nylon nuts.
Fit Round Caps (10) and (51) to
the Footplate Support Bar Pivot
Bolts.
CW
ACW
Connect the Footplate Support
Bars (27L/R ) to the Crankshaft
(31) by fitting 1 x Shouldered
Bolt (49 L/R) and 1 x Wave
Washer (48) through the
Footplate Support Bar Pivot
Brackets (32) into the
Crankshaft and then fitting
1 x ø13 x 19 Spring Washer
(71) followed by 1 x Nylon Nut