User's Instructions

Assembly Instructions
Step 5
Insert the seat post (19)
into the frame (20)
and line up the holes that
give the correct seat
height.
(This can be done after it
has been assembled.)
Secure the seat in
position with the
adjustment knob (21).
Step 6
The Pedals (24L, 24R)
are marked "L" and
"R" - Left and Right.
Connect them to their
appropriate Crank Arms
(23). The right crank
arm is on the right hand
side of the cycle as you
sit on it.
Note that the Right Pedal
(24R) should be threaded
on clockwise and the Left
pedal (24L) anti-clockwise.
9
19
20
21
23
24L
24R
The seat height is
correct when the knee is
slightly angled with the
pedal vertically down
and the foot parallel to
the floor.