User's Instructions

Assembly Instructions
9
If you feel it is more
comfortable for your
workout, you can attach
the PEDAL STRAP(20)
to the lower position in
the PEDAL CAP(19) as
shown in illustration 1
below.
Run the PEDAL
STRAP(20) through the
opening from the bottom
of the PEDAL CAP(19).
Pull the PEDAL
STRAP(20) to make the
Knot against the bottom
of the PEDAL CAP(19).
Run the PEDAL
STRAP(20) through the
opening in the PEDAL
CAP(19) on the other
side from the top as
shown in the illustration
1, then make the end of
the PEDAL STRAP(20)
go up to attach onto the
upper part of the PEDAL
STRAP(20) with the
Hook & LoopPad.
Attach the end of the
PEDAL STRAP(20) to
different position with the
Hook & Loop Pad to
adjust the length.Refer to
illustration 2.
20
19
19
20
Pedal strap
adjustment
Adjustment
Holes
0.6m
(Free area )
0.6m
(Free area )
0.6m
(Free area )
0.6m
(Free area )
rower and user
Training area 1.2m
Free area and
Training area
The free area shall be
not less than 0.6 m
greater than the training
area in the directions
from which the
equipment is accessed.
The free area must also
include the area for
emergency dismount.
Where equipment is
positioned adjacent to
each other the value of
the free area may be
shared.