User's Instructions

Assembly Instructions
If you feel it is more
comfortable for your
workout, you can attach
the PEDAL STRAP(20)
to the lower position in
the PEDAL (19) as
shown in illustration 1
Run the PEDAL
STRAP(20) through the
opening from the bottom
of the PEDAL (19).
Pull the PEDAL
STRAP(20) to make the
Knot against the bottom
of the PEDAL (19).
Run the PEDAL
STRAP(20) through the
opening in the PEDAL
( 19) on the other
side from the top as
shown in the illustration
1, then make the end of
the PEDAL STRAP(20)
go up to attach onto the
upper part of the PEDAL
STRAP(20) with the
Hook & LoopPad.
Attach the end of the
PEDAL STRAP(20) to
different position with the
Hook & Loop Pad to
adjust the length.Refer to
illustration 2.
20
19
19
20
Pedal strap
adjustment
Adjustment
Holes
0.6m
(Free area )
0.6m
(Free area )
0.6m
(Free area )
0.6m
(Free area )
rower and user
Training area 1.2m
Free area and
Training area
10
Illustration 1
Illustration 2
The free area must be at
least 0.6m greater than
the training area. This is a
space where you can
safely dismount, without
obstruction, in case of an
emergency. Where two
pieces of equipment are
positioned adjacent to
each other the free area
may be shared.