User's Manual

- 6 -
LED Indication
HDWX-100-T and HDWX-100-R have two (2) LEDs for Power and Wireless status located on the top.
• Power status LED (Blue)
When power is applied, the blue LED will be turned on.
• Wireless status LED
HDWX-100-T and HDWX-100-R are starting to connect each other, the blue LED will be blinking
approx.10~15sec. When it is completed, it will stop blinking and be turned on.
SW & Factory Reset
• SW Reset: Press the Reset switch on the front panel shortly to reset the default software.
• Factory Reset: To recover the Factory setting, press and hold the Reset switch on the front side
until the LED is turned off after blinking approx.10sec.
Note: If the number of TXs information is more than 10, please delete information by pressing
“Factory Reset” switch.
GUI Setting
Once GUI setting or PIN/PBC pairing between a transmitter and a receiver is completed, it will be
connected automatically from next time.
1) Description of buttons
[M] button: Menu or Select Button
(S): Select an item or activate the action
(L): Exit from GUI menu or return to GUI menu.
[
▶] button: Right Button or Function Key (Back)
(S): Move right or activate the action
(L): Return to previous menu.
[▼] button: Down Button
(S): Move Down
Fig. 2: Configuration of Receiver, HDWX-100-R