User's Manual

Welcome!
Congratulations on your purchase of the M1-2Rx-TR, Optical DVI Module.
This manual contains information that will assist you in installing and operating
the product.
Product Description
The M1-2Rx-TR module offers 100 meters extension of high-resolution digital
graphic data over fiber, directly connected between computers or media
receivers and displays. Two boxes, located one in the media receiver and the
other in the display are connected to each of them by a 1.0 m DVI copper
cable. Between two boxes, the 4 LC patch cord fiber bundled cable enables to
transmit 4 channels (R,G,B,Clk) of graphic data over it and the DVI Digital
Display Channel (DDC2B) interface is performed over a bundled copper cable,
so called as DDC cable, which optionally has RJ-45C connectors.
Shipping Group of M1-2Rx-TR Optical DVI Module
 Tx and Rx boxes: One (1) Transmitter (Tx) Box and One (1)
Receiver (Rx) Box.
 Option: DDC cable with RJ-45C.
 Option: 4 LC Patch Cord fiber bundled cable (Multimode glass
fiber).
 AC/DC power adapter: One (1) +12V units
 User’s Manual
 Quick Installation Note
Figure 1 – Overall Optical DVI Module
1-1 Welcome, Product Description
Product Specifications
M1-2Rx-TR Optical DVI Module
 Compliance with DVI standard: supports DVI 1.0, using fiber-optic
communication links and DDC2B.
 Extension limit: 100m (330feet) for UXGA (1,600x1,200) at 60Hz
refresh rate in ultimate operation.
 Graphic Transmission Bandwidth: supports up to 1.65Gbps
bandwidth per graphic channel at UXGA at 60Hz.
 Fiber-optic Connection: The transmitter and receiver boxes of M1-
2Rx-TR have 2 duplex LC receptacles connected to four 62.5/125µm
or 50/125µm Multi-Mode glass fibers cables.
 Mechanical specifications of Tx and Rx boxes
 Dimensions: 38mm / 19mm / 72mm (W/H/D)
 Weight: 46.0 ± 1.5 gr for each of Tx and Rx.
 Environmental Specifications
 Operating temperature: -10°C to 50°C
 Storage temperature: - 30°C to 60°C
AC/DC Power Adapter
 Power Input: Universal AC 85-264V, 50/60Hz, AC power cord with
power jack.
 Power Output: +12 V, 3.0 A SMPS DC-power Adapter
 Cord DC Jack & length: Core is 12 V and outer cylinder is GND.
Length is 18.5 cm
 AC Cord length: 1.8m
 Certification: PSE, UL, cUL, FCC, CE, TUV-GS
1-6 Product Specifications