User's Manual

Opticon

H-22 User Manual

1.8. Installing the Battery

The H-22 ships with a Lithium-ion battery in the box. Charge the battery fully before the first use.

Perform the following procedure to install the battery.

Note: The battery can also be charged in the optional cradle.

1.8.1. Installing the Battery

Figure 11. Install the Battery

1.8.2. Replacing the Battery Cover

Figure 12. Align the Battery Cover Figure 13. Lower the Battery Cover

Step 1:

Remove the battery cover. See

“Removing the Battery Cover” for

details.

Step 2:

Insert the battery (A) into the H-22 matching the

battery contacts with the contacts inside on the left

side of the H-22 case. Press down on the right side

of the battery to secure it in place (B).

See Fig 11.

Step 1:

Align the battery cover with the top of the battery bay. See Fig. 12.

Step 2:

Lower the cover in place. Secure it by turning the battery cover screws clockwise with a

coin. See Fig. 13.