User's Manual

Opticon
H-22 User Manual
79
Connecting to a Wi-Fi Network
Wi-Fi allows you to access the Internet by connecting to a wireless network or hotspot.
6.2.3. Connecting to a Wi-Fi Network
1. Tap > Settings > Connections > Wireless Manager.
2. Tap Menu > Wi-Fi Settings. See below left.
3. Select the desired wireless network and tap Connect.
4. In the Connects drop down menu, select one of the following options (see below middle) and
tap Next:
 The Internet for connecting to the Internet.
 Work for connecting to a private network.
5. Enter a network key if required. See below right.
6. Tap Finish to complete setup.
Figure 96. Wi-Fi Settings Figure 97. Configure Network Figure 98. Network Authentication
6.2.4. Creating a Wireless Connection
1. Tap > Settings > Connections > Wireless Manager.
2. Tap Menu > Wi-Fi Settings.
3. Select Add New.
4. Enter the following information and tap Next
 Network name
 Network type
 If you want to connect to another device instead of a network through an access point,
select This is a device-to-device (ad-hoc) connection.
5. Enter the following information and tap Next.
 Authentication type
 Data Encryption type
 Network key
 Key index
6. Enter the following information.
 Select Use IEEE 802.1x network access control to use EAP (Extensible Authentication
Protocol).
 Select EAP type: PEAP or Smart Card or Certificate.
7. Tap Finish to complete setup.