User's Manual

Opticon

H-22 User Manual

 ActiveSync over USB Serial

 ActiveSync RNDIS

 USB-Mass storage

 Internet sharing

When the device is connected to a PC using a USB cable the USB to PC settings will be shown to

the user so that the user can select how the device should behave, see below left. Either the device

will activate ActiveSync, or expose the external SD-card as a USB mass storage device, or activate

the Internet Sharing feature of the device. The alternatives are presented as a radio box list.

The user selection is persisted in order to preselect one of the three choices above. In case the user

doesn’t make an active selection within 5 seconds the USB to PC settings will be closed and the

preselected connection type is used.

A control panel application named “USB to PC” is available in the Connections settings. It contains

the same radio list with the four USB connection types mentioned above (last user selection is

preselected). A checkbox saying “Ask me first about USB connection type when I connect the

device to the PC” will be visible (default it is checked).

1. Tap > Settings > Connections > USB to PC.

2. Choose if the connections dialogue shall appear when a connection is made

3. Select the desired USB connection type and tap OK.

10. Backup Manager

H22 is provided with a backup manager application. The backup manager supports both full backup,

partial backup and selective backup. It also provides the possibility to view what is included in a

backup before restoring it to the device. Backup is possible to be made to or from either SD card or

the device.

1. Full backup med takes a full backup of the device including all files, databases, settings

and registry

2. Partial backup is a subset of the full backup where it is possible to select all files,

databases, settings and registry individually. It is not possible to select individual files in