User's Manual

Opticon
OPL 9813
Preliminary Specifications Manual
8
5. Controls
Item Specifications Remarks
Controls
MPU 32-bit microprocessor
Built-in ROM 512 KB
Built-in RAM 64 KB
External
memory
Flash ROM 512 KB (Option: Max. 4 MB)
SRAM 512 KB (Option: Max. 2 MB)
Display
LCD None
Dots
Backlight
Scanning
indicators
Tricolor LED and buzzer
Scanning
Laser wavelength/
output
650 nm / 1mW or less
Scanning
frequency
100 times/s
Clock Real time clock
Supports year, month, date, hour, minute and
seconds (leap year supported)
Keyboard
Up
Trigger
Down
Since the OPL9813 is fully programmable, the
actual function of these keys is determined by
the installed application.
Buzzer Loudness 75 dB(A) or higher
6. Electrical Specifications
6.1. Main Battery
The main battery is a lithium-ion secondary battery.
Nominal capacity: 1000 mAh
Battery charging time: Approximately 3 hours
6.2. Battery Operating Time and Charging Time
Parameter Specifications Notes
Backup battery 3 mAh manganese dioxide battery
Current
consumption
1 mA or less (on standby)
150 mA or less (when operating) GPS & Bluetooth on.
Usable time 50 hours or more (not using GPS)
10 hours or more (using GPS)
1 scan/5s
Data hold time 72 hours or more After main battery discharged
Note: Battery life may be shorter than specified above when the quality of the battery
pack is degraded.