User's Manual
Table Of Contents
- 1. Abstract
- 2. Overview
- 3. Physical Features
- 4. Environmental Specifications
- 5. Controls
- 6. Electrical Specifications
- 7. Optical Specifications
- 8. Technical Specifications
- 9. Interface Specifications
- 11. Packaging Specifications
- 12. Durability
- 13. Reliability
- 14. Regulatory Compliance
- 15. Safety precautions
Opticon
OPL- 9815
Specifications Manual
Note: The “RO” mark labeled on the package tray or package box guarantees that the
applicable product has passed our test of RoHS restrictions compliance (the
restriction of the use of certain hazardous substances in electrical and electronic
equipment, 2002/95 EC). However, this document does not have any legal weight in
the European Union.
12. Durability
12.1. Drop Test (without packaging)
No malfunction occurred after the following drop test.
Drop Test: Drop the data collector from a height of 150 cm onto a concrete floor. Each
side of the data collector impacted the floor three times.
12.2. Dust and Drip Proof
IEC IP54
Dust Prevention
Level Details
5
Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere
with the satisfactory operation of the equipment; complete protection against contact.
Water Prevention
Level Details
4 Water splashing against the enclosure from any direction shall have no harmful effect.
13. Reliability
MTBF (Mean Time Between Failures) of this product is 10,000 hours.
Figure 11: Drop test
21