User's Manual
Table Of Contents
- 1. Abstract
- 2. Overview
- 3. Physical Features
- 4. Environmental Specifications
- 5. Controls
- 6. Electrical Specifications
- 7. Optical Specifications
- 8. Technical Specifications
- 9. Interface Specifications
- 11. Packaging Specifications
- 12. Durability
- 13. Reliability
- 14. Regulatory Compliance
- 15. Safety precautions
Opticon
OPL- 9815
Specifications Manual
5. Controls
Item Specifications Remarks
Controls
MPU 32-bit microprocessor
Built-in ROM 512 KB
Built-in RAM 64 KB
External
memory
Flash ROM 1 MB
SRAM 512 KB
Display
LCD Monochrome
Dots 112 x 64
Backlight Yes
Scanning
indicators
Tricolor LED and buzzer
Keyboard Keys
Shift, backspace, Clear, dot, Enter, up, down
and trigger.
0~9 numeric keys
Scanning
Laser wavelength/
output
650 nm / 1mW or less
Scanning
frequency
100 times/s
Clock Real time clock
Supports year, month, date, hour, minute and
seconds (leap year supported)
Buzzer Loudness 75 dBA or higher
6. Electrical Specifications
6.1. Main Battery
The main battery is a lithium-ion secondary battery.
Nominal capacity: 1100 mAh
Battery charging time: Approximately 3 hours
6.2. Battery Operating Time and Charging Time (TBD)
Parameter Specifications Notes
Backup battery 3 mAh manganese dioxide battery
Current
consumption
1 mA or less (on standby)
160 mA or less (when operating) GPS, Bluetooth and backlight on.
Usable time 50 hours or more (not using GPS)
10 hours or more (using GPS)
1 scan/5s
Data hold time 72 hours or more After main battery discharged
Note: Battery life may be shorter than specified above when the quality of the battery
pack is degraded.
8