User Manual Part 1

OPTICON
User's manual
PHL-7000 series
2
-
19
“ Red” color Bar code reader on 1
Bar code reader LED
indicator
“ Green” color
Successful reading
“ Red” color Charging battery 2 Charge LED indicator
“ Green” color Battery fully charged
3 LCM / touch panel User input on touch panel by stylus
4 Left side scan key
Right side scan key
Left upper scan key
Right upper scan key
Start scanning bar codes by pressing any of
these four scan keys
5 Power key Put the PDT into suspend mode
Awake the PDT from suspend mode
6 F1 ~ F4 key A
pplication keys, hot keys of application program
defined by end user.
7 Navigation key Navigation keys for left, right, up and down
directions
8 Numeric keys Numeric keys
9 Alpha key Alpha keys
10 Fn key This k
ey is used in combination with other keys to
type special characters and perform system
functions.
11 Enter key This key confirms data entry
12 Earphone Jack
Connector
Connector input for earphone set
13 USB / RS232
Synchronization port
A connector to support USB host, client and
RS232.
14 Scan window Bar code reader window
15 Stylus Use the stylus for selecting items and entering
information.
16 Battery Cover Protect battery pack and remain IP54 rating
17 Battery cover latch To keep battery cover locked
18 Hand Strap This strap can be sealed tighter or looser
19 Speaker 1.5W speaker for audio output
20 DC Power Jack A connector to input power suppy to PDT.
21 End Cap Protect CF slot and SD slot from dust and water
Table 2-2 Description of PHL-7200 General View