User Manual Part 1

OPTICON
User's manual
PHL-7000 series
2
35
2.4.7.2 Alpha keys by “Alpha” + main Function
1. The
key enables you to toggle between the numeric and alpha modes. Numeric
mode is when you type numbers with number keys. Alpha mode is when you type letters
with the number keys.
2. When you press key, the Alpha icon appears at the task bar to indicate Alpha
mode is enabled. It means Alpha mode is disabled if the Alpha icon is not present at
Task bar. The keypad stays in the alpha mode until you press key again. For an
example to type cap1 word, press < wait 0.5 seconds >
.
3. If you want to type a lowercase c , press
(The key
three times, the key is needed if it s the first alpha character keying in). If a letter
that is on the same key as the last letter entered, wait two seconds after you pressed the
last key, then you can enter the correct series of keystrokes to create the next letter.
4. While you are in the Alpha mode and you press key to set the Caps mode, the
Caps mode remains until you press key again.
5. The A icon appears at the task bar during Caps mode.
To
enter
Press the Keys
To
enter
Press the Keys
Caps