User's Manual

OPTICON
User's manual
PHL-7000 series
3
-
36
3.2.11 Network and Dial-up Connections
ICON ITEM & FUNCTION
• “Connection” Tab :
ü To create a “Dial-up Connection” :
Ø Double-tap the “Make New connection” .
Ø In the “Make New Connection” dialog box, enter a name
for the connection.
Ø Select “Dial-Up Connection” .
Ø Select the “Next” button.
Ø Select the modem you want use.
Ø Select “Configure”
Ø Under “Connection Reference” , use the default settings
provided. If you can’ t connect using these settings, see
your ISP or network administrator for specific
information. If you want to always enter a phone number
before connecting, Select “Manual Dial” . Select “OK” .
Ø Select “TCP/IP Settings” . In the “General” tab, ensure
“Use Server-assigned IP address” is selected. In the
“Name Servers” tab, ensure “Use Server-assigned
addresses” is selected, and select “OK” . If you are
unable to connect with these default settings, see your
ISP or network administrator for specific TCP/IP
information.
Ø Select the “Next” button and type the telephone number.
Ø Select the “Finish” button.
The connection you just created appears as an icon in the
“Network and Dial-up Connections” folder.
ü Set up a point-to-Point Protocol(PPP) account with an
ISP and obtain the following information:
Ø Access telephone number
Ø User name
Ø Password