User's Manual

OPTICON
User's manual
PHL-7000 series
3
-
37
Once you have established an account, create a new
connection on your device. When creating this connection, you
should be able to use all of the default TCP/IP settings provided
in the Make New Connection Wizard. If you can’ t connect using
the default settings, contact your ISP or access your ISP’ s Web
site for specific TCP/IP information as well as primary and
secondary DNS address.
ü Modify connection setting
Ø Select Start > Settings > Network and Dialup
Connections
Ø Select the icon for connection settings you want to
modify.
Ø Select File > Properties, or double- tap the appropriate
icon.
Ø Select desired options. There may be additional settings
that depend on the connection. To modify, select the icon
and select the icon and select Advanced Settings…
from the menu.
Table 3-31 Network and Dial-up Connections
Figure 3-60 Network and Dial-up
Connections
Figure 3-61 Network and Dial-up
Connections