Owner's manual

The Netherlands
Opticon Sensors Europe B.V.
tel: [phone]
/
email: [e-mail]
U.S.A.
Opticon Inc.
tel: [phone]
/
email: [e-mail]
France
Opticon S.A.S.
tel: [phone]
/
email: [e-mail]
Germany
Opticon Sensoren GmbH
tel: [phone]
/
email: [e-mail]
Italy
Opticon s.r.l.
tel: [phone]
/
email: [e-mail]
Spain
Opticon Sensores S.L.
tel: [phone]
/
email: [e-mail]
Contact
Sweden
Opticon Sensors Nordic AB
tel: [phone]
/
email: [e-mail]
United Kingdom
Opticon Limited
tel: [phone]
/
email: [e-mail]
Taiwan
Opticon Far Eastern Ltd.
tel: [phone] / email: [e-mail]
China
Opticon Sensors Europe B.V., Shanghai Representative Oce
tel: [phone]
/
email: [e-mail]
Australia
Opticon Sensors Pty. Ltd.
tel: [phone]
/
email: [e-mail]
Brazil
Opticon Sensors Europe B.V., Latin American Oce
tel: [phone]
/
email: [e-mail]
Please contact OPTICON or your local dealer.
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.
Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
• The CRD-1531 is a designated communication modem cradle for the DCL-1530 and the
DCL-1531 data collectors.
Introduction
CRD-1531
Copyright 2007, Opticon All rights reserved.
No. Name Function
①
DC Power Supply Connector A connector a dedicated AC adapter.
②
Modular Jack A connector for telephone line.
③
IrDA Communication
Window
Window for the communication between
the data collector and the cradle.
④
Power Supply
Status LED (red)
This LED turns solid red when the power
is turned ON.
⑤
Data Reception
Status LED (green)
This LED turns solid green when there is
a data reception via IrDA.
⑥
Data Transmission
Status (Yellow)
This LED turns solid yellow when there is
a data transmission via IrDA.
⑦
DIP Switches DIP switches to configure the baud rate of the IrDA.
⑧
Serial Label
■
Detailed View
⑧ ⑦
①
③
②
⑤ ⑥④
Overview
■
CRD-1531 Basic Specifications
Parameter Specifications
Physical
Features
Size (H)67.5
×
(W)71.5
×
(D)98.5 mm Max
Weight 75g Max (excl. cable or AC adapter)
Display
Section Status
LEDs
Power Status: red
Data Reception Status: green
Data Transmission Status: yellow
Interface
Section
Comm. Line Telephone Line
Comm. Line Voltage 48V
Comm. Protocol
ITU-T V.90, V.34,V.32bis, V.32, V22bis, V.22,
V.23, Bell 212A, V.21 or Bell 103 (selectable)
Data Compression Scheme ITU-T V.42bis or MNP5 (selectable)
Error Correction Scheme ITU-T V.42 or MNP2-4 (selectable)
Baud Rate
9600bps to 56kbps
Depends on the comm. protocol.
Modulation Method PCM, TCM, or QAM
Dialing Pulse: 10/20pps, DTMF (selectable)
Modem Control AT Command
Line Connector RJ-11 6P Modular Connector
Power Supply Section Main Power AC Adapter: 6V/2A
Durability Operating Temperature 0 deg. C to 40 deg. C
Operating Humidity 25% to 85% (non-condensing)
Storage Temperature -20 deg. C to 60 deg. C
Storage Humidity 20% to 90% (non-condensing)
Shock Endurance
Dropped 6 times onto concrete from a
height of 75cm with no defects found.
Anti-static Electricity
±
15kV (no destruction)
CRD15319062-0-00
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or
converted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages, howsoever caused.
Caution and Warning
Handling Instructions
• Do not attempt to disassemble, modify or update this product.
• Do not drop this product or put heavy items on this product.
• Do not insert foreign substances into this product.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- In dusty environments.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce
heat.
- Near microwaves, medical devices, or low-power radio stations.
• If water or any metallic object gets into this product and if you detect smoke or a strange smell coming
from the device, please stop operating the unit and contact your nearest dealer.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild
detergent.
Before Getting Started
■
What

s in the Box
Confirm that you have the following items before getting started:
No. Items Function
1 Cradle Designated communication cradle for the DCL-1530 and the DCL-1531.
2 AC Adapter Kit Designated AC adapter kit for the CRD-1531.
3 Modular Cable and Splitter Designated modular cable and a splitter for the CRD-1531.
4 Quick Start Guide Provides product information and instruction guide.
Note: The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
* The cradle DIP switch
settings override the host
settings. Set SW6 to OFF
to disable host settings.
* Please open the DIP
switch cover when using
the DIP switches.
* Please close the DIP
switch cover after using
the DIP switches.
Memo
Using the Cradle
■
DIP Switch (DIPSW) Configuration
Use the DIP switches on the bottom of the CRD-1531 to configure
IrDA baud rate setting.
Baud Rate
DIPSW
SW 1 SW 2 SW 3 SW 4 SW 5 SW 6
115.2Kbps ON ON ON
× ×
OFF
57.6Kbps OFF ON ON
× ×
OFF
38.4Kbps ON OFF ON
× ×
OFF
19.2Kbps OFF OFF ON
× ×
OFF
9.6Kbps ON ON OFF
× ×
OFF
4.8Kbps OFF ON OFF
× ×
OFF
2.4Kbps ON OFF OFF
× ×
OFF
DIPSW Table
SW 1