Instruction Manual

Overview
 CRD-19-E4 Basic Specifications
Parameter Specifications
Size (H)95 x (W)350 x (D) 115 mm Max
Weight 650g
Physical
Features
Color Black
Operating Voltage Dedicated AC Adapter: 12V, 5A
Standby: 1.6A max (while not
charging)
Power Supply
Section
Current
Consumption
Max: 3.35A (charging 8 devices)
Battery
Charging
Section
For Charging the
Battery Pack
Output: DC 4.2V, 750mA (per slot)
Operating Temp. 0 deg. C to 40 deg. C
Operating Humidity 25% to 85% (non-condensing)
Storage Temp. -20 deg. C to 60 deg. C
Durability
Storage Humidity 20% to 90% (non-condensing)
 CRD-19-E4 Basic Specifications
Parameter Specifications
Product No.
Power Voltage: AC 100V to 240V
Input
Current Consumption: 0.8A Max
Power Voltage: 12V
AC Adapter
Output
Peak Current: 5A Max
 Detailed View
1
2
4
3
9
8
7
6
5
No Part Function
1 Power LED
Indicated the status of the cradle. Blinking
YELLOW means device is ready.
2 Charging LED
Indicated the charging status of the battery. Solid
GREEN means the battery is fully charged. Solid
RED means the battery is being charged. Blinking
RED means there is an error.
3 Device Pocket
Set the H-19 in this pocket to connect to the
network.
4 Battery Pocket Set the battery in this pocket to charge it.
5 DC Jack DC-12V power supply jack.
6 Uplink Ethernet uplink for CRD-19-E4.
7 Ethernet Ethernet port for network device.
8 Network LEDs
Indicate the status of the Ethernet port. Blinking
GREEN means there is network traffic.
9 Reset Button Factory Default Reset Button.
Using the Cradle
 Network Requirements
À 10/100 BaseT Ethernet.
À DHCP Network. Please refer to CRD-19-E4 User Manual if the network does not contact a DHCP server.
À One IP Address.
 Network Functions
À Connect a network cable to a 10/100 BaseT DHCP network. Connect the network cable and power adapter to CRD-19-E4
and wait 25 seconds for the yellow Power LED to blink..
À Set the H-19 in the device pocket and wait for network connection to be established on the device within 8 seconds. The
network indicator on H-19 will display connection status.
À The H-19’s battery will be charging at the same time.
 Battery Charging Function
À Set the battery to be charged into one of the Battery Pockets.
À The Charging LED in front of the Device Pocket will display the charging status of the battery. If the LED blinks with red
Light, please remove the battery and go back to setp 1.
 Administration Software (Please refer to CRD-19-E4 User Manual)
À Web-based AdminTool – allows IT staff to manage the cradle.
À Device Locator – an application that allows IT staff to locate the cradle on the network.
Please visit http://www.opticon.com for more product information
 If you try to charge the battery with the ambient temperature outside of the range of 0 to 40 degrees C, the cradle
may stop the charging operation to protect the battery.
 Please clean the charging terminals of the H-19 on a regular basis.
Introduction
 The CRD-19-E4 is a designated network cradle for the H-19 handheld device and battery charger.
 Read this quick start guide carefully before installing and/or using this product.
 Keep this quick start guide for future reference and store it in a safe place.
Notice
 This quick start guide may be revised or withdrawn at any time without prior notice.
 This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
 Trademarks used are property of their respective owners.
 Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages,
howsoever caused.
Caution and Warning
Handling Instructions
【CRD-19-E4】
 Do not attempt to disassemble, modify or update this product.

Do not drop this product or put heavy items on this product.

Do not insert foreign substances into this product.

Do not use this product in the following areas:
—
In areas exposed to direct sunlight for long periods of time.
— In dusty environments.
—
Near water or other liquids, or in extremely high humidity.
—
Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
— Near microwaves, medical devices, or low-power radio stations.

If water or any metallic object gets into this product and if you detect smoke or a strange smell coming from the device,
please stop operating the unit and contact your nearest dealer.

When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
What’s in the Box
No. Items Product No. Function
1 Cradle with 4 battery walls CRD-19-E4 Quad network cradle for the H-19 and battery charger.
2 AC Adapter AC adapter for the CRD-19-E4.
3 Quick Start Guide Provides product information and instruction guide.
Note: The number of accessories may differ depending on the product specification. Please contact the nearest dealer if
accessories are damaged or missing.
Contact
Please contact OPTICON or your local dealer.
Netherlands
Opticon Sensors Europe B.V.
Tel: [phone]
email: [e-mail]
Sweden
Opticon Sensors Nordic AB
Tel: [phone]
email: [e-mail]
U.S.A
Opticon Inc.
Tel: [phone]
email: [e-mail]
United
Kingdom
Opticon Limited
Tel: [phone]
email:
[e-mail]
France
Opticon S.A.S.
Tel: [phone]
email:
[e-mail]
Taiwan
Opticon Far Eastern Ltd.
Tel: [phone]
email:
[e-mail]
Germany
Opticon Sensoren GmbH
Tel: [phone]
email:
[e-mail]
China
Opticon Sensors Europe B.V., Shanghai Representative Office
Tel: [phone]
email:
[e-mail]
Italy
Opticon s.r.l.
Tel: [phone]
email:
[e-mail]
Australia
Opticon Sensors Pty. Ltd.
Tel: [phone]
email:
[e-mail]
Spain
Opticon Sensores S.L.
Tel: [phone]
email:
[e-mail]
Brazil
Opticon Sensors Europe B.V., Latin American Office
Tel: [phone]
email: [e-mail]
More product details, additional support and configuration options (from the Universal Menu Book) are available at www.opticon.com
Copyright © 2008. Opticon. All rights reserved.