Specifications
Table Of Contents
- 1. Abstract
- 2. Overview
- 3. Basic Specifications
- 4. Detailed View
- 5. Electrical Specifications
- 6. Interface Specifications
- 7. Optical Specifications
- 8. Technical Specifications
- 9. Environmental Specifications
- 9.1. Temperature
- 9.2. Humidity
- 9.3. Ambient Light Immunity
- 9.4. Dust and Drip Proof
- 9.5. Vibration Strength (without packing)
- 9.6. Vibration Strength (in individual packing)
- 9.7. Drop Impact Strength (without packaging)
- 9.8. Drop Impact Strength (in individual packaging)
- 9.9. Electrostatic Discharge (ESD) Immunity
- 10. Regulatory Compliance
- 11. RoHS
- 12. Reliability
- 13. Precautions
- 14. Product Labels
- 15. Packaging Specifications
- 16. Physical Features
- 17. Supported Symbologies
OPI-3301i
Specifications Manual
9
8. Technical Specifications
Code reading is performed by positioning the aiming light over the center of a code. The conditions for
technical specifications are as follows unless otherwise specified in each section.
<Conditions>
Temperature and humidity : Room temperature, room humidity
Ambient light : 100 ~ 200 lx
Angles : Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
Curvature : R = ∞
Power supply voltage : 3.7 V
PCS (1D and 2D) : 0.9 or higher
Scanning Test : 1 read in 0.5 sec or less. Accept the performance with 70% or more
success rate for 10 readings.
Bar code test sample
(1D and 2D)
: Refer to Section 8.1. for details.
<Bar code test sample>
1D codes: OPTOELECTRONICS test samples
GS1 Databar, Stacked codes, 2D codes: Labels printed by a dedicated printer for bar code