Installation Guide

2
INSTALLATION INSTRUCTIONS
CRITICAL SAFETY NOTE: Read all instructions before beginning installation
 WARNING – RISK OF FIRE OR ELECTRIC SHOCK. INSTALLATION OF THIS RETROFIT ASSEMBLY
REQUIRES A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE
LUMINAIRE ELECTRICAL SYSTEM AND THE HAZARD INVOLVED. IF NOT QUALIFIED, DO NOT
ATTEMPT INSTALLATION. CONTACT A QUALIFIED ELECTRICIAN
 WARNING – RISK OF FIRE OR ELECTRIC SHOCK. INSTALL THIS KIT ONLY IN LUMINAIRES THAT
HAVE THE CONSTRUCTION FEATURES AND DIMENSIONS SPECIFIED, AND WHERE THE INPUT
RATING OF THE RETROFIT KIT DOES NOT EXCEED THE INPUT RATING OF THE LUMINAIRE
 WARNING – RISK OF FIRE OR ELECTRIC SHOCK. LUMINAIRE WIRING AND ELECTRICAL PARTS
MAY BE DAMAGED WHEN DRILLING FOR INSTALLATION OF LED RETROFIT KIT. CHECK FOR
ENCLOSED WIRING AND COMPONENTS
 WARNING – TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES
OF SHEET METAL OR OTHER SHARP OBJECTS
 THE RETROFIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF
THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION
 BRANCH-CIRCUIT CONDUCTORS WITHIN 75 MM (3 IN.) OF A LED DRIVER SHALL HAVE AN
INSULATION TEMPERATURE RATING NOT LOWER THAN 90°C (194°F) UNLESS SUPPLYING A
LUMINAIRE MARKED AS SUITABLE FOR A DIFFERENT INSULATION TEMPERATURE
Model
No.
Input
Volts(V)
Frequency
(Hz)
System
Watts(W)
Output
Current(mA)
LED
Modules
LED
Drivers
Location Type
RKS1420
120/277
50/60
20
480
1
1
Damp
RKS2420
120/277
50/60
20
480
2
1
Damp
RKS2430
120/277
50/60
30
720
2
1
Damp
RKS3430
120/277
50/60
30
720
3
1
Damp
RKS2440
120/277
50/60
40
960
2
1
Damp
RKS3440
120/277
50/60
40
960
3
1
Damp
RKS2450
120/277
50/60
50
1200
2
1
Damp
RKS3450
120/277
50/60
50
1200
3
1
Damp
RKS2220
120/277
50/60
20
480
2
1
Damp
RKS3220
120/277
50/60
20
480
3
1
Damp
RKS2230
120/277
50/60
30
720
2
1
Damp
RKS3230
120/277
50/60
30
720
3
1
Damp