User manual

1
3
Preparing Your Receiver
Using the AC Power Outlet
Your receiver has an AC power outlet that you can use to power an electronic
device, such as a turntable, cassette deck, VCR, and so on. This switched out-
let turns on and off with the receiver and provides a maximum of 100 Watts.
Connecting to AC Power
Before you plug in the receiver’s power cord, double check all other connec-
tions.
To power the receiver, plug the supplied power cord into a standard AC outlet.
The power cord’s plug is polarized and fits only one way.
Demonstration Display
To see a demonstration of the receiver’s display, press and hold
RETURN
while
turning on power. The receiver cycles through several demonstration displays.
To exit the demonstration mode, press any key.
Caution:
Do not connect appliances with
high power consumption, such as a
heater, iron, monitor, or TV, to this AC
outlet. Doing so can cause a risk of over-
heating and fire, and could damage the
receiver.
AC OUTLET
Warning:
To prevent electric shock, do
not use this polarized plug with an exten-
sion cord, receptacle, or other outlet
unless you can fully insert the blades to
prevent blade exposure.
A
B
R
L
R L
FRONT SPEAKERS AC OUTLET