Home Theater System User Manual

15
• To improve reception for weak
FM stereo stations, press
STEREO/MODE
so
MONO
(monaural) appears on the
display. The sound is no
longer in stereo, but reception
should improve. To return to
stereo sound, press
STEREO/
MODE
.
• For the best FM reception,
fully extend the FM antenna.
• The AM antenna is built-in. To
improve AM reception, move
or re-position the System 730.
3. Set
VOLUME
(or press
VOLUME
+
or
–
on the remote control) to
the desired level, and select the
desired
X-BASS
and graphic
equalizer settings.
USING MEMORY
TUNING
You can store and easily recall up to
24 of your favorite AM and FM radio
stations (8 AM and 16 FM) in the
System 730’s memory.
Storing a Station in Memory
1. Press
TUNER
to select
AM
,
FM1
,
or
FM2
.
2. Press
TUNING UP
or
DOWN
, or
TUNING
s
or
t
on the remote con-
trol, to tune to the desired sta-
tion.
3. Press
MEMORY
.
MEMORY
appears on the display.
4. Within 3 seconds, press a num-
ber (1-8) for the memory loca-
tion where you want to store the
station.
MEMORY
disappears,
and
P
(program), the selected
memory number, and
STATION
appear on the display. For
example, if you select memory
number 8,
P8 STATION
appears.
Note
: If
MEMORY
disappears
before you press the desired
memory number, repeat Steps 3
and 4 then try again.
5. Repeat Steps 2-4 to store up to
eight stations each in
AM
,
FM1
,
and
FM2
.
Notes
:
• You cannot clear a station from
memory, but you can store a
new one in its place.
13-1277.fm Page 15 Wednesday, July 14, 1999 4:11 PM