User manual

23
3. Use the number keys to enter the correct
time (hour and minute), then press
100
/
to select AM or PM.
For example, to set 10:28 AM, press
1
,
0
,
2
, and
8
, then press
100
/ to select AM.
Note:
The VCR accepts the last three or
four valid entries as the time. For example,
if you enter
1
,
3
,
3
, and
5
, the VCR stores it
as 3:35.
4. Press to highlight
DATE
. Then use the
number keys to enter the correct date
(month and day). For example, to set Feb-
ruary 15, press
0
,
2
,
1
, and
5
.
Note:
The day of the week is automatically
set; however, it might be temporarily incor-
rect if the year is not set yet.
5. Press to highlight
YEAR
. Then use the
number keys to enter the last two digits of
the current year. For example, to set 1996,
press
9
and
6
.
6. Press to highlight
DST
. To set daylight
saving time (DST), press or so
ON
appears on the display.
When you set
DST
to
ON
, the VCR auto-
matically adds one hour to all the displayed
times starting from the first Sunday in April,
and subtracts one hour from all displayed
times on the last Sunday in October.
7. If the information you entered is not cor-
rect, repeatedly press or to move the
cursor to the incorrect information, then
enter the correct information.
If the information you entered is correct,
press
SET
. The screen disappears.
SETTING THE CHANNELS THE
VCR TUNES TO
You can have the VCR automatically store all
active channels in your area into its memory,
and you can add to or remove the stored chan-
nels.
1. Turn on your TV and VCR.
2. Press
MENU
to display the main menu.
3. Press twice to highlight
CHANNEL
PRESET
, then press
SET
. The channel pre-
set menu appears.
4. Select the input signal source (
AIR
or
CATV
).
AIR
— If you connected an antenna or
cable without a cable box to the VCR,
press or so
AIR
is highlighted, then
press so an arrow appears next to
CH
SET
.
CATV
— If you connected cable and use a
cable box:
a. Press or until you highlight
CATV
,
then press .
b. Press or to highlight the type cable
you have (
NORMAL
,
HRC
, or
IRC
).
Note:
Most cable systems use NOR-
MAL, but if you are not sure what type
of cable service you have, contact your
cable company.
c. Press so an arrow appears next to
CH
SET
.
AM/
PM
POWER
ON SCREEN
DISPLAY
CH
CH
INPUT
EJECT
123
456
78
100/ 0
9
TV/VCR MODE LOCK
ZERO BACK
AM/
PM
AM/
PM
SELECT : CHANGE:
AIR/CATV AIR CATV
CHANNEL PRESET
ENTER :SET EXIT :MENU
CH SET AUTO MANUAL
16-546.fm Page 23 Tuesday, July 20, 1999 4:25 PM