User's Guide

7
USER GUIDE
Version 1.0
To disconnect from the Internet you use the application provided.
To remove the card from its slot, you should use the safe removal procedure
detailed later in this manual (page 8).
6. LED STATUS
The LEDs on the datacard provide a lot of information. How they flash will tell you
what is going on.
Red LED
• – GSM / EDGE (2G)
Blue LED
• – UMTS / HSDPA (3G)
LED FLASHING MEANING NOTES
• • •
• • •
Unregistered. Searching for a
network.
Both LEDs flash at the
same time giving a purple
colour.
• • •
Registered on a 3G network.
SMS possible. No access
to the Internet.
•• •• ••
Connected or Ready for
connection to the Internet on a
3G. (UMTS) network.
If connected – this is a
UMTS connection.
•••• •••• ••••
Connected to the Internet.
This is an HSDPA
connection.
• • •
Registered on a 2G (GSM)
network.
SMS possible. No access
to the Internet.
•• •• ••
Connected or Ready for
connection to the Internet on a
2G network.
If connected – this is a
GPRS connection.
•••• •••• ••••
Connected or Ready for
connection to the internet on a
2G network.
If connected – this is a
EDGE connection.
••••••
A problem occurred.
Eject the card safely and
try again.