User's Manual

You have to select which type of connection you want to set up.
You choose either to import an existing connection or to set up a connection manually.
When you set up your connection manually right-click on the connection and select
rename. Enter a name for your connection (e.g. “My GPRS connection with Operator X”)
and fill in all the parameters of your GPRS connection. Enter the GPRS/UMTS settings
you received from your provider.
getting started
15
Setup
The Setup page allows you to create, edit and configure a GPRS, GSM or UMTS connection.
Also, when a connection is present, this can be started from there.
In the top of the screen you have a list of all available connections.
Using the GlobeTrotter card for a DATA connection
Caution! Some Service Providers use automatic DNS Server assignment.
However if you can connect but have trouble opening a webpage we advise you
to enter the DNS settings manually. Please contact your Service Provider to obtain
the required DNS settings.
Depending on your network operator, a GPRS, GSM or UMTS connection might
already have been installed. If not, you will have to create a new connection following
the next steps. Click on Setup. Click on New to create a new connection.
getting started
14